RS22AQXMQ01 Roper Refrigerator - Instructions

the part was replaced in less than minute

Read the instructions, watched the video and followed the very clear instructions and lay out.

Repaired it using the video that you sent through email. Thank goodness for the video or would still be trying to fix it!

Removed the door (3 bolts on top). Removed the old plastic door closing cam on the bottom. Installed the new one. It was too tall (probably my fault), so I trimmed it with garden shears (it was a tubular piece of plastic). If you do this, be very careful, as the shears cut through the plastic MUCH easier than I thought. Popped the new one on, re-secured the door, and it works great now. Thank you partselect!

When I ordered the new auger drum from this website, I noticed a video that explained how to install the item. When I received the new drum, I went to the website and found the video. All I did was to watch the video and do what the repairman did. I did get a little confused when I noticed that the auger in the video was metal, and mine was plastic. However, upon removing the pieces as shown in the video, it became clear that the new auger drum would fit the same way the broken one had fit. After that, it was a snap to put the pieces back together.

the repair from the video was exact to a tee. Very helpful 100%.

The icemaker is in a side by side refrigerator/freezer with an auger driven ice bin dispenser, so space was limited. I first removed the ice bin but I couldn't see the three nuts holding the icemaker in place. I removed the ice bin support bracket (under the icemaker) using a Phillips head screw driver. Now the bottom nut holding the icemaker in place was easily visible and I was able to determine the size of nut driver I needed to completely remove it. Then I felt for the location of the top two nuts, slipped the nut driver on and loosened them. I was able to lift the icemaker off the top two nuts without completely removing them. Using a flat head screw driver, I pushed down the white tab holding the wiring harness connection to the icemaker and removed the harness, freeing the ice maker for complete removal. I did not need to replace the wiring harness, so I simply reversed the whole process to install the new icemaker. I am a 61 year old female with rheumatoid & degenerative arthritis and found this installation really easy, with the one exception of snapping the wiring harness connection into the new icemaker - I didn't have the thumb strength. I had to wait for a relative to come and snap the wiring harness connector into place for me. I also had to use some snips to cut out the plastic tab (scored) for the water feed to the icemaker but was able to complete the entire installation within 30 minutes.

Unplug the unit cord, remove 3 screws on the icemaker. Unhook the wiring harness from the refrigerator, remove the unit and reverse the order to install the new unit. Reinstall the on off bail, and the icemaker tray. Make sure that the unit is level after the new installation so that water does not spill out of the icemaker.

R and R parts

Removed the broken icemaker per instructions provided with the replacement part purchased. by Part Select. The whole procedure went very well and my new icemaker is working like a charm. I highly .recommend Part Select. Kitchenaid had discontinued making the the original icemaker and Part Select provide an OEM replacement that worked perfectly.

just like video very easy ! Thank you for the fast service and good information for installation.

Used flat blade screwdriver to remove old guide by spreading the remaining top tabs. Inserted new guide and tipped the top forward to line up bottom tab in slot. Used screwdriver to push in tab. Once it was seated pressing in the top snapped the guide into place easily.

I ordered both the defrost timer and thermostat thinking the problem was the thermostat but scince the two parts were housed in the same part of the refrigerator I decided to replace both parts. Watching the YouTube video made this job a complete success!! The parts arrived within 24 hours! This girl is a VERY happy customer. Thank you!

Got Online to Parts Select put in the model number, selected from parts schematic, Ordered parts. Reviewed YouTube instructions supplied by Parts Select, Canadian service tech in video very knowledgeable about repair, followed his instruction and fixed the Ice maker. Very easy with Parts Select help.

I Googled the problem and after reading several posting & suggestions decided that the Ice dispenser kit would probably solve the problem. I ordered both parts on the chance that it might be only the micro switch and it was only a $10 part, the ice dispenser kit was $50. The access was really easy and the switch was installed in about 20 minutes but did not solve the problem so I proceeded with the kit. The parts came out fairly easy but our actual set up was slightly different from the video and print instructions. Our model did not have the heating ribbon on the door flap and the little barrel part was permanently attached to the refrigerator so I thought I could be in trouble. Did not realize that we had cracker the lever bracket clip during removal so my husband "brainstormed" a fix. That's what we needed the large head screw and drill for. We drilled the screw into the refrigerator so it holding the spring loaded piece tightly in position. Works fine. I was told my a repairman over the phone that the dispenser was probably not fixable on our model. I saved an expensive service call AND GOT THE DISPENSER WORKING!