Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
Below is a list of all parts for the Roper Refrigerator RS22AQXKQ04 - Side-by-side. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.
This ten watt appliance light bulb is two inches tall. It is used with both washers and dryers.
This white ice bin auger drum comes with a washer.
This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer. If you are noticing temperature issues with your refr...
This part is also known as Cover.
This is the glass panel only. The frame is sold separately.
This switch is located inside the dispenser.
Used with Evaporator Fan Motors.
*Please note, this door chute is no longer being manufactured with a heater.
When the icemaker shut off arm is high enough the icemaker will shut off and no more ice will be made until the level of ice in the bin drops. Also, the icemaker can be turned off by lifting the arm all the way to the top until in a locked position. If your icemaker is dispensing too much ice or is not making enough ice, you may have to replace the icemaker shut off arm. This part is made of white plastic and metal. This icemaker shut off arm may differ in design from your previous part. However, the part will still perform the same function.
May look different but will still function the same as the original and it is an authorized manufacture replacement.
This metallic screw is less than an inch long and comes with a plastic washer.
This part is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated. Fan blad...
The purpose of the light switch in your refrigerator is to automatically turn on the light when the door is opened. If the light does not come on automatically when you open the door, the contacts inside the light switch may be burned out, meaning it is time to replace the switch. This package contains both the new light switch and a small plastic spacer. To complete this repair, you will need to remove the control panel section of your refrigerator. The only tools you will require for this repair are a 1/4-inch nut driver and maybe a small flat blade screwdriver. Be sure to disconnect the power source from the refrigerator before completing this repair.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.