Quick Question!

Have you ever purchased from PartSelect.com before?

Models > RS22AQXFW00

RS22AQXFW00 Roper Refrigerator - Overview

Get Parts and Repair Help for RS22AQXFW00

If you know the refrigerator repair part you need, you can browse the list of all parts on the RS22AQXFW00, or you can search by name or part description. You can also find your part by where it is located on the RS22AQXFW00 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for RS22AQXFW00 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.91

Light Bulb - 40W

Sold individually.

Order within the next 9 hrs and your part ships today!
$119.75

Replacement Ice Maker

***NOTE: Ice maker does NOT come with the bail or shut off arm. Must order them separately if required. It does come complete with flat and round plug wiring harness, the mounting hardware, and the instructions. Its harness can be reused. The ice maker will not fit refrigerators that have the ice auger mounted on the door.

Order within the next 9 hrs and your part ships today!
$65.25

Icemaker Control Assembly

This part is used to help tell the icemaker what to do - it turns the timing cams and the ejector blades. Motor is not sold separately.

Order within the next 9 hrs and your part ships today!
$19.27

Ice Bin Auger Drum

This white ice bin auger drum comes with a washer.

Order within the next 9 hrs and your part ships today!
$81.58

Shelf Frame with Glass

This part is also known as Cover.

Order within the next 9 hrs and your part ships today!
$16.79

Door Closing Cam Kit

This door closing cam kit is intended for use with the bottom of refrigerator and freezer door hinges. The cam helps with the closing of the doors and to keep them slightly in position when opened.

Order within the next 9 hrs and your part ships today!
$7.40

Water Tube Kit

This tubing is 1/4'' in diameter and comes with 2 inserts. This tubing may be longer than the original, and may have to be cut.

Order within the next 9 hrs and your part ships today!
$61.16

Evaporator Fan Motor - 120V 60Hz

This part is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated. Fan blade not included.

Order within the next 9 hrs and your part ships today!
$18.18

Shelf Support Stud - White

This kit contains two options - One that is a push and turn and the other that is a screw in.

Order within the next 9 hrs and your part ships today!
$56.55

Snack Crisper Drawer

This drawer does not include the white handle trim any longer.

Order within the next 9 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Ice Maker quit working, I could manually cycle unit but then the water would overflow when unit was re-filling.

  • Customer: Max from Green Castle, IN
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 542 of 556 people found this instruction helpful
I backed out the 2 top screws about a quarter inch and then removed bottem screw with a quater inch nut driver. I then lifted Ice Maker clear of the two top screws and lowered it enough to unclip the power connection with a small screwdriver. The new Ice Maker was wired correctley for my refrigeator so all I had to do wea reconnect the power connection and... read more

track of the pan become broken

  • Customer: Darrell from Cedar Bluff, VA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 403 of 412 people found this instruction helpful
Buy a new crisper pan,slide out old one ,slide in new one read more

No ice

  • Customer: Daniel from Suwanee, GA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 430 of 511 people found this instruction helpful
removed flap door in front of icemaker...removed 3 screws with bolt heads...removed one additional screw with bolt head and ice unit slid out. I removed motor unit (pops out no screws). Replaced and had ice within 3 hours. read more