Models > RS20DKXDW01 > Instructions

RS20DKXDW01 Roper Refrigerator - Instructions

All Instructions for the RS20DKXDW01
496 - 510 of 591
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
the refrigerator tunrs off and defrost
After watching the convenient movie, the replacment of the Thermostat was very simple and easy. i woul strongly advise you to take a picture of the wires before disconecting so, you will be sure to to reconetc it again.The replacment was a success and the refrigerator has been working since them
Parts Used:
Thermostat Assembly
  • dorival from pembroke pines, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Side Of Drawer Was Broken And Couldn't Run On The Guides.
Took the broken drawer out and installed the new drawer.
Parts Used:
Refrigerator Crisper Drawer with Humidity Control
  • Valerie from Sevierville, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Old refrigerator drawer gave up the ghost--don't know why--plastic became brittle
Parts Select Website was very easy to use, selected the correct part for me with no problem. Same drawer as Sears was selling but for much less money. Drawer came in new from the factory. Great Service, Fast Delivery. The shipper had damaged the drawer--something poked through the box and put a whole in the drawer--a small one cause by a sharp instrument of some kind. Called parts select, the problem was very simply rectified by refunding my money and then I bought a new drawer at the same time. No fuss, no muss. Fast delivery and great service.
Parts Used:
Refrigerator Crisper Drawer with Humidity Control
  • Lloyd from Spokane, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Broken Kickplate Grille
My wife removed the broken Grille and replaced it with new Grille without using any tools. She was aware of how to remove and replace the grille as she has done it over the years when cleaning under the refrigerator.
Parts Used:
Kickplate Grille
  • Ken from The Dalles, OR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
The slide/ glide portion of the original drawer broke off
Pretty simple, remove the old one and put in the new one - kinda alike the "Automotive Tech's" of today.
Parts Used:
Refrigerator Crisper Drawer with Humidity Control
  • Doug from Acworth, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
old crisper drawer gave up the ghost--brittle
Nothing to it, just slide the drawer in. Fast Delivery, Smooth Transaction, Great Service. I will use them for all the parts I need in the future. Thanks
Parts Used:
Refrigerator Crisper Drawer with Humidity Control
  • Lloyd from Spokane, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
none
Took the old one out and put the new one in. No problem.
Parts Used:
Refrigerator Crisper Drawer with Humidity Control
  • Nancy from Petersburg, WV
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
fridge too warm
remoove all the food and shelves out from the freezer section, remoove the light bulb lens ( 1 phillips screw) remoove light bulb, take out 6 srews on the back panel then slide out through the top with a slight bending curve motion, the bimetal thermostat will be clamped to the evaporator inlet, ( just after the cap tube) snap it off, then cut the wires about 2 inches from the stat, strip the ends about a quarter inch with wire strippers, same on the new stat, then use 16 or 18 gauge butt splices and crimp them , then reassemble in reverse order.
Parts Used:
Bi-Metal Defrost Thermostat
  • mike from ROSCOE, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Thermostat problem
Thermostat replacement
Parts Used:
Thermostat Assembly
  • Juan from Sugar Hill, GA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
No Light
Took socket out and replace it with new one. Very easy. W saved alot of money doing it ourself.
Parts Used:
Light Socket Kit
  • Mary from Jefferson Township, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
my fridge did not have a cold cut and cheese drawer
The customer service people did some cross checking and found a shelf and drawer that would work in my fridge. It did!! I love it now!!!Thanks for your help I did have to remove one of the selves - but now I have an extra!
Parts Used:
Refrigerator Crisper Drawer With Handle
  • Lynn from Lakewood, CO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Crisper draw broke
Package came in two days.I opened the box ,took the old draw out and slid the new draw in. Fixed in less than two minutes.I would definitely order from Parts Select again. Thanks for the prompt service
Parts Used:
Refrigerator Crisper Drawer with Humidity Control
  • thomas from garrison, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
.Replace sheared-off freezer shelf support
First, although I was SURE I knew what to do, I watched the repair video. I used needle nose pliers to push broken support into wall since I could not pull it out. Selected correct wall fixture, spread holder pins, and snapped into wall opening. Couldn't have been easier!!! Very useful site.
Parts Used:
STUD-SHELF
  • ROBERT from WASHINGTON, DC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
Was this instruction helpful to you?
Thank you for voting!
Refrigerator door will not close by itself
I took the upper three screws pull the door up and then removed the broker part in the bottom of door by removing one screw. Install new part and put door back securing it by the three screws on the top of regrigerator. Very easy
Parts Used:
Door Closing Cam Kit
  • Genovevo from Helotes, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Wrench set
Was this instruction helpful to you?
Thank you for voting!
Feezer did not start well any more
Easy job due to great instruction video by PartSelect.
Parts Used:
Thermostat Assembly
  • Eric from Fort Myers, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the RS20DKXDW01
496 - 510 of 591
Back to Top