RS20AWXEW00 Roper Refrigerator - Instructions

I have some electronics background but your listed problems helped me narrow down the problem. I ordered the part, removed old part, installed new part (maybe 15 minutes total) and my icemaker started dumping the ice that was in the tray within 20 minutes and making more. That clunking sound of ice was music to me ears and wallet!! Thanks!!

I called a repair man out to see what the problem was because my husband just died and I didn't want to pay such high prices for a repair. He told me I needed a new motor for the ice maker and it would be a total of about 305.00. I couldn't believe the price. It cost me 59.99 for his diagnosis. I went to your web site and found the part and watched you installation video. I am 65 years old and I was able to install the new part in less than 15 min. The part was about 95.00. I saved 150.00 by doing it myself. I will always look on line before I have a repair man do a job. I may need them to diagnose the problem, but I will try myself before paying such outrageous fees.

Watched the trouble shooting & installation videos , checked to make sure water was getting to the door. I look'ed closely at the entire unit. Every thing seem'ed to be ok. I made a guess as to which part to order. The control motor or the thermostat. The control motor made more sense to me. I made the right guess. Works like new.

I followed directions to take off the front of the water and ice maker then I saw the switch but I found out the plastic piece that held it in place was broke. I didn't order a new piece I used my reliable super duper quick glue and put the broken pieces to geter then put switch in place. then volla I had the water running like it did before. Thank you for telling me how to get the front off. That was the life saver.

Be gentle when installing new plastic crisper drawer. If possible, read install instructions in Refrigerator Owner Booklet. Put new crisper drawer in position and gently push in until you are stopped by encountering the "stops" in side-support rails that are attached permanently to walls of refrigerator. Per Owner Booklet, lift new crisper drawer up slightly to pass over the "stops", then let the crisper drawer settle back down and push it in the rest of the way. Removal is reverse procedure. Be gentle!

I took the ice bin and crusher down to find the problem. I needed a new auger. I did a Google search for the part and found instructions for taking the crusher mechanism apart. This went smoothly until I went to put it back together. I had to follow the instructions in reverse which was really difficult. I advise folks to use their cell phone camera to take close up pictures of the dismantling process . Use these to help you put it back together. All in all, I was very pleased and plan to return when another need arises. John (retired x 2)

Just like the video I watched online at your web site. piece of cake.!!

Upon arrival I unpacked drawers and set in their location

Shut off water to icemaker, unplugged frig, loosened top 2 screws on iccemaker, removed bottom screw, unplugged icemaker and removed from frig. new plug in was the same so didn't need to chan ge it. reversed steps to install, back in businees in less than 15 mins., making ice and no leaks!!!!!!!

Remove container from freezer, remove 5 screws that attach container to face plate/auger assembly and separate the two parts, slide the new container onto the face plate/auger assembly and screw them together with 4 of the 5 screws you removed (the new container isn't drilled for the fifth screw and it doesn't appear to be necessary). You can use a quarter inch nut driver or a flat blade screw driver. Piece of cake, nothing to it, a 5 year old could do it.

The disassembling and replacing the broken part went exactly as the directions.

When the new crisper drawer arrived, I pulled out the old one and slid in the new one in less than 5 minutes. We won't overlead the new crisper drawer. Thank you PartSelect. I saved about $25.00 ordering this part from you.

Unplugged the refrigerator then removed two vertical screws on the very back back of the control panel (the ones with the washers). Do not remove the four other vertical screws in the panel. The front plastic plate on control panel snaps off and there are two horizontal screws under the plate. Remove them and the control panel will drop down allowing access to the light switch. Unplug the two wires (one black and one white) from the old switch. Discard the old switch, snap the new one into place and reconnect the two wires. Snap the front plastic plate back into place, plug in the refrigerator and you are done! Problem solved with a new $16.00 switch and saved at least $75.00 or more from an appliance repair call. Thanks Part Select!

Followed the example on the video and everything fit in place without any problems. Only issue is that on a double door fridge the freezer is rather narrow so there isn't much room to work making it was a bit difficult to access the mounting screws.

Removed cardboard, Removed 4 bracket mounting screws, Removed plug, Removed screws securing motor to bracket. . Installed new motor on bracket, Installed fan on motor shaft , installed new pigtail on motor, Installed new assembled motor and bracket, Hooked up pigtail to electric supply, Installed cardboard, Plugged in to power supply and Voila, not even one foul word during the whole process. Note: watch the factory video. Thanks.