Models > RMS640

RMS640 (RMS640) Caloric Range - Overview

Get Parts and Repair Help for RMS640

If you know the range repair part you need, you can browse the list of all parts on the RMS640, or you can search by name or part description. You can also find your part by where it is located on the RMS640 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the RMS640 [Viewing 1 of 1]

$36.73

Flat-Style Oven Igniter - Bake/Broil

This igniter doesn't come with the bracket or the connector. It can be used for either the bake or broil in your appliance.

Spark Ignition Module

This spark ignition module is blue and is just under three inches in length.

Thermostat

This part establishes and maintains the internal temperature of the oven cavity.

VALVE, GAS

DISCONTINUED

CLOCK

SPRING, BROILER DOOR

DISCONTINUED

$87.43

CLOCK, DIGITAL 120/60

CLOCK, AUTO

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

STOVE WORK BUT YOUR OVEN WON'T GET HOT ?

  • Customer: Brian from Cumming GA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 7 of 8 people found this instruction helpful
IF YOUR STOVE WORK'S BUT YOUR OVEN WON'T GET HOT IT IS YOUR IGNIGTER THE IGNIGHTER IN PROPER WORKING CONDITION SENDS A SIGNAL TO THE GAS VALVE SAYING LET THE GAS FLOW ITS OK. WHEN THE IGNIGHTER QUITS WORKING IT WON'T LET THE GAS FLOW AND YOUR OVEN WILL NOT GET HOT. IT IS AN EASY FIX. JUST PULL OUT ALL OF INTERIOR PARTS THE RACKS AND THE BOTTOM HEAT SHIELD TH... read more

oven would not light

  • Customer: MATTHEW from SAN CLEMENTE CA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 7 of 8 people found this instruction helpful
Removed oven door and burner guard. Removed screws holding ignitor bracket and small panel beneath oven door. Disconnected ignitor wires behind panel and pulled out ignitor. Removed old ignitor from bracket and inserted new unit. Fed wires back down thru tubing and screwed in bracket. Connected wires and replaced panel. (Note: old ignitor glowed but would no... read more