Models > RMS306

RMS306 Caloric Range - Overview

Get Parts and Repair Help for RMS306

If you know the range repair part you need, you can browse the list of all parts on the RMS306, or you can search by name or part description. You can also find your part by where it is located on the RMS306 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for RMS306 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.58

Light Bulb - 40W

Sold individually.

$18.07

2 Piece Broiler Pan

The top of this part is now black.

$6.46

Burner Bowl

This pan is dishwasher safe and comes one to a package.

$52.29

Gas Burner Grate

Sold individually.

$28.02

Suface Burner Ignition Switch

When the gas burner valve knob is depressed and turned, this part creates a spark that lights the gas and starts the burner.

$50.95

Front Burner

$19.57

Griddle Igniter

$2.70

Frame Screw

Sold Individually.

$31.80

IGNITER-SP

$106.71

Spark Module

The color of the original part or the part you receive may be different from the pictured part. This is still the correct part.

Common Symptoms of the RMS306 [Viewing 1 of 1]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Ignitor did not spark when turning the know

  • Customer: Richard from Lansing MI
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 8 of 9 people found this instruction helpful
Had to remove the 4 range knobs, and the oven knob and then the facie. Two screws under the end caps and two on each side from the back on each end. Design defect: one of these screws which attaches through the frame to the facie also attaches the support which holds up the range top. Take that one off last. Remove the two wires that attach to the oven light... read more

electric ignite gas stove kept clicking the ignitor unless unplugged from electrical outlet

  • Customer: Diana from Jacksonville FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 6 of 7 people found this instruction helpful
I removed the 2 screws that held the housing on at the back of the stove. Then I removed the 2 screws that held the module to the back of the stove. Since I am not an experienced electrical person (I am a female nurse in the operating room), I unplugged 1 wire at a time from the old module and plugged it into the new module. I repeated this step with each wi... read more

two burner ignitors would not function on cook stove

  • Customer: Warren from Las Cruces NM
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 5 of 6 people found this instruction helpful
1. ordered two new switches
2. installed switches
3. all ignitors work

Really appreciated the pictures of the parts--made selection very easy. read more