Quick Question!

Have you ever purchased from PartSelect.com before?

Models > RMC305PDQ4

RMC305PDQ4 Whirlpool Microwave Oven Combo - Overview

Get Parts and Repair Help for RMC305PDQ4

If you know the microwave oven combo repair part you need, you can browse the list of all parts on the RMC305PDQ4, or you can search by name or part description. You can also find your part by where it is located on the RMC305PDQ4 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave oven combo. We’ve also included any installation videos we have for RMC305PDQ4 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Inner Door Glass

Glass ONLY.


Bake Element

This part is located at the bottom of the oven.


Oven Rack

Sold individually.


Glass Cooking Tray

This tray rotates in your microwave ensuring more even temperatures.


Screw, 10-16 x 1

This screw is sold individually.


Touch-Up Paint - White



Baseless Lamp

This is a small light bulb.


2 Piece Broiler Pan

The top of this part is now black.


Spray Paint - 12 oz. - White



Sold individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Broke the glass panel inside the oven door -- dropped a baking dish on the glass!

  • Customer: Robert from Wildwood, MO
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 140 of 177 people found this instruction helpful
Easily removed the door from the oven by releasing clips attached to the door hinge -- very nicely engineered. Removed about 6 philips head screws to allow the door assembly to be taken apart for access to the glass. Lifted out the broken glass, cleaned the inside of the door, installed the new glass, reassembled the door (a two minute project), and reatt... read more

Oven buzzed and no heat

  • Customer: Joseph from Saint Charles, IL
  • Difficulty: Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Screw drivers, Socket set
  • 48 of 58 people found this instruction helpful
First took down the hood/microwave and removed the sheet metal housing.
I changed HV diode as it was the least expensive component and the first one that internet suggested and tested bad with a ohm meter. Didn't fix a thing.
Capacitor failed test with meter so I ordered and then replaced this.
Still no change so I ordered a new magnetron. ... read more

I broke the Bake Element while cleaning the oven.

  • Customer: Daniel from Cheraw, SC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 44 of 53 people found this instruction helpful
I removed the two screws that held the bake element in place. Next I removed the Bake Element. I had to unscrew the oven to go behind it because when one piece off of the element broke, it slide back behind the oven. I pushed the wire back thru the piece holes, connected the Element, and pushed the element with the wires back through the holes. I rescrewed t... read more