Models > RMC275PDQ1

RMC275PDQ1 Whirlpool Oven - Overview

Get Parts and Repair Help for RMC275PDQ1

If you know the oven repair part you need, you can browse the list of all parts on the RMC275PDQ1, or you can search by name or part description. You can also find your part by where it is located on the RMC275PDQ1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your oven. We’ve also included any installation videos we have for RMC275PDQ1 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$45.67

Bake Element

$62.32

Glass Cooking Tray

$41.89

Interior Oven Door Glass

This is the innermost piece of glass that faces in your oven when the door is close.

$2.70

Screw

This screw is sold individually.

$19.30

2 Piece Broiler Pan

$40.91

Broil Element

This broil element is found on the roof of the oven.

$19.90

Baseless Lamp

This is a small light bulb.

$3.86

Touch-Up Paint - White

$43.41

Turntable Support Kit

$41.43

Oven Rack

Sold individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Inner window glass cracked

  • Customer: Evan from Albuquerque NM
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 56 of 70 people found this instruction helpful
The first thing I did was to remove the oven door by releasing the two latches on the hinges (by hand). I then raised the door toward the vertical position and lifted up. The hinges slide out of the oven housing. I laid the door, inside face up on my island counter top. This ensures that none of the parts will fall when disassembling the door. Next I un... read more

Oven buzzed and no heat

  • Customer: Joseph from Saint Charles IL
  • Difficulty: Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Screw drivers, Socket set
  • 27 of 30 people found this instruction helpful
First took down the hood/microwave and removed the sheet metal housing.
I changed HV diode as it was the least expensive component and the first one that internet suggested and tested bad with a ohm meter. Didn't fix a thing.
Capacitor failed test with meter so I ordered and then replaced this.
Still no change so I ordered a new magnetron. ... read more

Microwave turntable does not work

  • Customer: Todd from San Bernardino CA
  • Difficulty: A Bit Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Pliers, Screw drivers
  • 18 of 22 people found this instruction helpful
My unit is a wall mount/cabinet/built-in model. The repair is actually fairly simple once you determine that the actual microwave is just a component of the entire unit, and that it (the microwave) can be easily removed from the unit. I did not figure this out until after I removed the entire unit (disconnect the power supply, lift the entire bulky, heavy ... read more