Models > RM278BXV1

RM278BXV1 Whirlpool Oven / Microwave Combo - Overview

Get Parts and Repair Help for RM278BXV1

If you know the oven / microwave combo repair part you need, you can browse the list of all parts on the RM278BXV1, or you can search by name or part description. You can also find your part by where it is located on the RM278BXV1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your oven / microwave combo. We’ve also included any installation videos we have for RM278BXV1 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.58

Light Bulb - 40W

Sold individually.

$25.45

Bake Element - 2600W 240V

This closed hinged style bake element is 15-3/4 inches long and 16-5/8 inches wide. The terminal depth is three inches and they are 1-3/4 inches apart.

$14.85

Oven Control Knob

Sold Individually. This part has been updated and no longer has the red dot. It is ONLY available in black now. This knob accepts a double flat shaft.

$18.07

2 Piece Broiler Pan

The top of this part is now black.

$2.07

Screw with Washer

This metallic screw is less than an inch long and comes with a plastic washer.

$41.79

Broil Element - 208V

This broil element is found on the roof of the oven and has push-on terminals.

$5.05

Touch-Up Paint - White

18ml

$49.11

Oven Rack

Sold individually.

$7.54

Spray Paint - 12 oz. - White

$6.77

Touch-up Paint - Black

16ml

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

lower back element stopped working

  • Customer: Bradley from Lexington OK
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 450 of 530 people found this instruction helpful
I got the model number and ordered a replacement element from partselect, was shipped quickly and I installed it in about 30 minutes, it now works great read more

Oven stopped heating.....

  • Customer: Richard from Pattonsburg MO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 223 of 373 people found this instruction helpful
Removed the oven racks....

Removed the two screws holding element in place...

Disconnected spade lug connectors from old heating element.

Connected spade lug connectors to new heating element.

Reinstalled screws.....replaced oven racks....mission acomplished! read more

The bake element stopped working.

  • Customer: Harry from Charlotte NC
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 195 of 335 people found this instruction helpful
First I cut off the power to the stove and double-checked to make sure no current was flowing to the unit. There were two screws attaching the bake element plate to the oven. I unscrewed the two screws and carefully pulled the bake element away from the oven exposing the contact wires. I carefully loosened the wire contacts from the bake element, slid the b... read more