Quick Question!

Have you ever purchased from PartSelect.com before?

Models > RM235PXL0

RM235PXL0 Whirlpool Microwave Oven Combo - Overview

Get Parts and Repair Help for RM235PXL0

If you know the microwave oven combo repair part you need, you can browse the list of all parts on the RM235PXL0, or you can search by name or part description. You can also find your part by where it is located on the RM235PXL0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave oven combo. We’ve also included any installation videos we have for RM235PXL0 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.91

Light Bulb - 40W

Sold individually.

$21.46

2 Piece Broiler Pan

The top of this part is now black.

$24.04

SPRNG-DOOR

$4.94

Screw - #10 - 32x1/2

Sold Individually.

Door Handle Spring

Offset Oven Rack

BELT-DRIVE

Switch Bezel

$30.33

Micro Switch Kit

Electronic Timer

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

lower back element stopped working

  • Customer: Bradley from Lexington, OK
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 455 of 538 people found this instruction helpful
I got the model number and ordered a replacement element from partselect, was shipped quickly and I installed it in about 30 minutes, it now works great read more

Oven stopped heating.....

  • Customer: Richard from Pattonsburg, MO
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 225 of 376 people found this instruction helpful
Removed the oven racks....

Removed the two screws holding element in place...

Disconnected spade lug connectors from old heating element.

Connected spade lug connectors to new heating element.

Reinstalled screws.....replaced oven racks....mission acomplished! read more

The bake element stopped working.

  • Customer: Harry from Charlotte, NC
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 201 of 341 people found this instruction helpful
First I cut off the power to the stove and double-checked to make sure no current was flowing to the unit. There were two screws attaching the bake element plate to the oven. I unscrewed the two screws and carefully pulled the bake element away from the oven exposing the contact wires. I carefully loosened the wire contacts from the bake element, slid the b... read more