Models > RLS669 Maytag

RLS669 (RLS669) Caloric Range - Overview

Get Parts and Repair Help for RLS669

If you know the range repair part you need, you can browse the list of all parts on the RLS669, or you can search by name or part description. You can also find your part by where it is located on the RLS669 by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the RLS669 [Viewing 1 of 1]

$31.16

IGNITER-SP

$31.24

PILOT-OVEN

$108.86

Spark Module

The color of the original part or the part you receive may be different from the pictured part. This is still the correct part.

Safety Valve with Thermocouple

VALVE, GAS

Gas Oven Thermostat

This gas oven thermostat has pre-made holes right through the body of the thermostat so that you easily mount it vertically. This thermostat has a 36 inch capillary tube and it allows for temperatures between 140 degrees Fahrenheit and 550 degrees Fahrenheit, plus the broiling temperature. Use this thermostat for your standing pilot model Amana brand gas range.

PILOT, OVEN BURNER (S

CLOCK

OVEN THERMOSTAT, SPARK

SPRING, BROILER DOOR

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

electric ignite gas stove kept clicking the ignitor unless unplugged from electrical outlet

  • Customer: Diana from Jacksonville FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 5 of 6 people found this instruction helpful
I removed the 2 screws that held the housing on at the back of the stove. Then I removed the 2 screws that held the module to the back of the stove. Since I am not an experienced electrical person (I am a female nurse in the operating room), I unplugged 1 wire at a time from the old module and plugged it into the new module. I repeated this step with each wi... read more

The Oven Would Not Light

  • Customer: RICHARD from GLOVERSVILLE NY
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 4 of 10 people found this instruction helpful
Removed the defective igniter, removing one screw and disconnected wire, replaced new ignighter in reverse fashion. And WELLA! The old oven works again!! read more