Quick Question!

Have you ever purchased from PartSelect.com before?

Models > RLS345-OF

RLS345-OF (RLS3450OF) Caloric Range - Overview

Get Parts and Repair Help for RLS345-OF

If you know the range repair part you need, you can browse the list of all parts on the RLS345-OF, or you can search by name or part description. You can also find your part by where it is located on the RLS345-OF by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$18.44

Top Burner Knob

Sold Individually. This knob accepts a D-shaped shaft.

SCREW

REGULATOR-

ASSY,THERMOSTAT KIT

CLIP, CAPILLARY

DISCONTINUED

DISCONTINUED

ALMOND (2)

DISCONTINUED

COOKTOP, HARVEST GOLD

Common Symptoms of the RLS345-OF

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Ignitor did not spark when turning the know

  • Customer: Richard from Lansing, MI
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 8 of 9 people found this instruction helpful
Had to remove the 4 range knobs, and the oven knob and then the facie. Two screws under the end caps and two on each side from the back on each end. Design defect: one of these screws which attaches through the frame to the facie also attaches the support which holds up the range top. Take that one off last. Remove the two wires that attach to the oven light... read more

Left rear burner would not ignite

  • Customer: John from Perth Amboy, NJ
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 5 of 6 people found this instruction helpful
Removed the burner plates. Lifted up the range top. Removed the knobs. Unbolted the 2 rounded nuts at top of face plate. Removed the 4 screws that hold the face plate in place from behind. Un plugged the old switch and plugged in the new one and bam! The burner worked. Thanks, Super fast shipping! The part was here in less than 36 hours. John, N.J. read more

two burner ignitors would not function on cook stove

  • Customer: Warren from Las Cruces, NM
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 5 of 6 people found this instruction helpful
1. ordered two new switches
2. installed switches
3. all ignitors work

Really appreciated the pictures of the parts--made selection very easy. read more