Quick Question!

Have you ever purchased from PartSelect.com before?

Models > RLS269

RLS269 Caloric Range - Overview

Get Parts and Repair Help for RLS269

If you know the range repair part you need, you can browse the list of all parts on the RLS269, or you can search by name or part description. You can also find your part by where it is located on the RLS269 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for RLS269 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.91

Light Bulb - 40W

Sold individually.

Order within the next 9 hrs and your part ships today!
$22.22

2 Piece Broiler Pan

The top of this part is now black.

Order within the next 9 hrs and your part ships today!
$20.32

Top Burner Spark Igniter

Also known as a spark electrode.

Order within the next 9 hrs and your part ships today!

Spark Module

The color of the original part or the part you receive may be different from the pictured part. This is still the correct part.

KNOB

SWITCH, ROCKER

WINDOW- OV

PILOT-OVEN

SUPPORT,BODY CARRIAGE

Gas Oven Thermostat

This gas oven thermostat has pre-made holes right through the body of the thermostat so that you easily mount it vertically. This thermostat has a 36 inch capillary tube and it allows for temperatures between 140 degrees Fahrenheit and 550 degrees Fahrenheit, plus the broiling temperature. Use this thermostat for your standing pilot model Amana brand gas range.

Common Symptoms of the RLS269

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

electric ignite gas stove kept clicking the ignitor unless unplugged from electrical outlet

  • Customer: Diana from Jacksonville, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 8 of 9 people found this instruction helpful
I removed the 2 screws that held the housing on at the back of the stove. Then I removed the 2 screws that held the module to the back of the stove. Since I am not an experienced electrical person (I am a female nurse in the operating room), I unplugged 1 wire at a time from the old module and plugged it into the new module. I repeated this step with each wi... read more

Ignitor did not spark when turning the know

  • Customer: Richard from Lansing, MI
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 8 of 9 people found this instruction helpful
Had to remove the 4 range knobs, and the oven knob and then the facie. Two screws under the end caps and two on each side from the back on each end. Design defect: one of these screws which attaches through the frame to the facie also attaches the support which holds up the range top. Take that one off last. Remove the two wires that attach to the oven light... read more

Left rear burner would not ignite

  • Customer: John from Perth Amboy, NJ
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 5 of 6 people found this instruction helpful
Removed the burner plates. Lifted up the range top. Removed the knobs. Unbolted the 2 rounded nuts at top of face plate. Removed the 4 screws that hold the face plate in place from behind. Un plugged the old switch and plugged in the new one and bam! The burner worked. Thanks, Super fast shipping! The part was here in less than 36 hours. John, N.J. read more