Models > RKD394

RKD394 Caloric Oven / Microwave Combo - Overview

Get Parts and Repair Help for RKD394

If you know the oven / microwave combo repair part you need, you can browse the list of all parts on the RKD394, or you can search by name or part description. You can also find your part by where it is located on the RKD394 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your oven / microwave combo. We’ve also included any installation videos we have for RKD394 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.58

Light Bulb - 40W

Sold individually.

$19.98

Thermostat Knob

This knob accepts a D-shaped shaft.

$28.02

Suface Burner Ignition Switch

When the gas burner valve knob is depressed and turned, this part creates a spark that lights the gas and starts the burner.

$8.71

Drip Pan

$50.95

Front Burner

$23.84

Oven Seal - Top or Bottom

This piece of oven door seal has a metal hook on each end. This seal is compatible with the top and the bottom of the oven door window.

$31.80

IGNITER-SP

OVEN RACK

SWITCH, ROCKER

OVEN THERMOSTAT, SPARK

Common Symptoms of the RKD394 [Viewing 1 of 1]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Ignitor did not spark when turning the know

  • Customer: Richard from Lansing MI
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 8 of 9 people found this instruction helpful
Had to remove the 4 range knobs, and the oven knob and then the facie. Two screws under the end caps and two on each side from the back on each end. Design defect: one of these screws which attaches through the frame to the facie also attaches the support which holds up the range top. Take that one off last. Remove the two wires that attach to the oven light... read more

Left rear burner would not ignite

  • Customer: John from Perth Amboy NJ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 5 of 6 people found this instruction helpful
Removed the burner plates. Lifted up the range top. Removed the knobs. Unbolted the 2 rounded nuts at top of face plate. Removed the 4 screws that hold the face plate in place from behind. Un plugged the old switch and plugged in the new one and bam! The burner worked. Thanks, Super fast shipping! The part was here in less than 36 hours. John, N.J. read more

two burner ignitors would not function on cook stove

  • Customer: Warren from Las Cruces NM
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 5 of 6 people found this instruction helpful
1. ordered two new switches
2. installed switches
3. all ignitors work

Really appreciated the pictures of the parts--made selection very easy. read more