Models > RK961G*J2

RK961G*J2 Hotpoint Range - Overview

Get Parts and Repair Help for RK961G*J2

If you know the range repair part you need, you can browse the list of all parts on the RK961G*J2, or you can search by name or part description. You can also find your part by where it is located on the RK961G*J2 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for RK961G*J2 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the RK961G*J2 [Viewing 3 of 3]

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.82

Light Bulb - 40W

Sold individually.

$26.33

Bake Element - 240V

This bake element kit comes with two installation screws.

$23.61

Broil Element

The depth of the screw-on terminals is 2-3/4 inches and they are 1-1/4 inches apart.

$16.87

Broiler Pan - Large

Includes the pan and grate.

$4.27

Light Cover

$90.96

Oven Door Gasket

$16.45

Broil Element Support

This part supports the broil element in the oven.

$16.23

Washer - 12 Pack

$159.96

Wire Rack

$88.64

Outer Oven Door Glass

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

oven lower burner burned out

  • Customer: james from franklin TN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 373 of 374 people found this instruction helpful
Very easy, remove two screws, pull burner unit out slightly, then remove the two screws attaching the wires, one to each side, remove old unit and replace with new unit and replace screws.

Works fine perfect replacement. read more

Bake element was on its last legs, starting to crack but still functional.

  • Customer: Lawrence from San Jose CA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 126 of 192 people found this instruction helpful
Removed the racks, unscrewed the back plate which holds the element, unscrewed the leads from the element, removed the old part.

Reversed the process to install the new element.

Turned the oven on for a few minutes to burn any contaminates off the new element, replaced the racks.

And that was it; quite easy. read more

Lower back element had burned out with a piece melted out of it.

  • Customer: Gregory from Peabody MA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Socket set
  • 75 of 77 people found this instruction helpful
First I opened the shipping box that the new part came in and figured out which tools I would need. Then I went down to the cellar and clicked off the breaker that supplied power to the oven. In this case, it was the only 50 amp breaker in the panel so It was easy to figure out.
Then I hung a drop light inside the oven so I could see clearly and used a ... read more