Models > RK767G*T7

RK767G*T7 Hotpoint Range - Overview

Get Parts and Repair Help for RK767G*T7

If you know the range repair part you need, you can browse the list of all parts on the RK767G*T7, or you can search by name or part description. You can also find your part by where it is located on the RK767G*T7 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the RK767G*T7 [Viewing 2 of 2]

$21.38

Bake Element - 240V 2300W

This closed, hinged style bake element with screw in terminals is 15-1/4" long and 18-1/4" wide. The depth of the terminals is 2-1/2".

$21.09

Bake Element - 240V

This bake element kit comes with two installation screws.

$27.42

Broil Element

The depth of the screw-on terminals is 2-3/4 inches and they are 1-1/4 inches apart.

$4.41

Light Cover

$1.34

Screws - Package of 12

$16.87

Broiler Pan - Large

Includes the pan and grate.

$23.76

Broil Element Kit

This element has screw on terminals.

$36.73

Clock Knob Kit - 3 Pack - Chrome

These are chrome and will look differently than what you see in these photos.

$90.96

Oven Door Gasket

$26.28

Neon Indicator Light

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

element quit working

  • Customer: Wilbur from Taylorville IL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 467 of 470 people found this instruction helpful
Unhooked electrical wiring from unit and rehooked new unit to electrical wiring. read more

Replacment of the bake unit

  • Customer: Beth from Matthews NC
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Socket set
  • 465 of 466 people found this instruction helpful
The hardest part was removing the old nuthead screws off the old bake burner. Once those were off installing the new bake element was simple. One screw in each wire terminal, two hex head screws to hold the unit in place. Works like a charm! read more

oven lower burner burned out

  • Customer: james from franklin TN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 457 of 534 people found this instruction helpful
Very easy, remove two screws, pull burner unit out slightly, then remove the two screws attaching the wires, one to each side, remove old unit and replace with new unit and replace screws.

Works fine perfect replacement. read more