Quick Question!

Have you ever purchased from PartSelect.com before?

Models > RK767*T5

RK767*T5 Hotpoint Wall Oven - Overview

Get Parts and Repair Help for RK767*T5

If you know the wall oven repair part you need, you can browse the list of all parts on the RK767*T5, or you can search by name or part description. You can also find your part by where it is located on the RK767*T5 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your wall oven. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the RK767*T5

[Viewing 2 of 2]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$29.86

Bake Element - 240V 2300W

This bake element is meant for your range and is 240 volts and 2300 watts. This closed hinged style element with screw-in terminals measures at 15-1/4 inches long and 18-1/4 inches...

$36.12

Bake Element - 240V

This is a 240 volt bake element for your oven or range. The kit comes with two installation screws and the element. The element functions by supplying heat from the bottom of the oven to bake or cook your food. You may need to replace the bake element if your oven is not heating properly. Each screw gets screwed into each wire terminal with a Phillips screw driver. Hold the wires forward to make sure the wires do not fall back through the rear of the oven. Unplug your appliance or shut off your circuit breaker to the appliance before installing the new part.

$33.73

Broil Element

The broil element is located at the top of the oven and gives off heat in order to bake evenly. If you notice that the element is not heating up or is not cooking evenly it could b...

$18.56

Broiler Pan - Large

This large broiler pan is found in the bottom of your oven and is used to catch drippings from broiling foods. This part includes the grate and bottom pan and is made of porcelain. The grate measures 15-1/2 inches wide by 13 inches deep and the pan is about 17 inches wide by 13 inches deep. No tools are required to replace this item, simply pull out the lower drawer of your range, pull down the front of the drawer, slide the pan out and slide the new one into place. This is a genuine part sourced right from the manufacturer.

$1.63

Screws - Package of 12

$20.74

Broil Element Kit

This element has screw on terminals.

$5.30

Light Cover

This light bulb lens covers the interior light bulb in an oven, range, or stove. No tools are necessary to replace this part. Simply slide off the wire bracket to remove the existi...

$98.61

Oven Door Gasket

This door gasket or seal is used in ranges and ovens. The rubber gasket creates a protective seal between the oven door and the opening of the oven. The function of this seal is to trap heat and prevent it from escaping when the oven door is closed. If your oven door gasket is ripped, damaged, or you find hot air is escaping from your oven, it is best to replace the gasket to solve the problem. Remember to unplug your appliance from the power source before installing this part. For installation instructions, refer to the manual provided by the manufacturer.

$3.50

Mounting Screw

This screw is less than 1/2 inch in length. It is sold individually.

$19.57

Broil Element Support

This part supports the broil element in the oven.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Replacment of the bake unit

  • Customer: Beth from Matthews, NC
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Socket set
  • 544 of 554 people found this instruction helpful
The hardest part was removing the old nuthead screws off the old bake burner. Once those were off installing the new bake element was simple. One screw in each wire terminal, two hex head screws to hold the unit in place. Works like a charm! read more

element quit working

  • Customer: Wilbur from Taylorville, IL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 502 of 521 people found this instruction helpful
Unhooked electrical wiring from unit and rehooked new unit to electrical wiring. read more

oven lower burner burned out

  • Customer: james from franklin, TN
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 484 of 564 people found this instruction helpful
Very easy, remove two screws, pull burner unit out slightly, then remove the two screws attaching the wires, one to each side, remove old unit and replace with new unit and replace screws.

Works fine perfect replacement. read more