Models > RK524GP3BG

RK524GP3BG Hotpoint Oven - Overview

Get Parts and Repair Help for RK524GP3BG

If you know the oven repair part you need, you can browse the list of all parts on the RK524GP3BG, or you can search by name or part description. You can also find your part by where it is located on the RK524GP3BG by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your oven. We’ve also included any installation videos we have for RK524GP3BG parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the RK524GP3BG [Viewing 2 of 2]

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.58

Light Bulb - 40W

Sold individually.

Order within the next 0 mins and your part ships today!
$40.79

Bake Element

This bake element is found on the bottom of the oven.

Order within the next 0 mins and your part ships today!
$4.48

Single Heating Element Support Clip

This metallic clip is used to help support the broil element. Sold individually.

Order within the next 0 mins and your part ships today!
$42.41

Broil Element - 240V

This oven broil element has push-on terminals.

Order within the next 0 mins and your part ships today!
$12.16

Timer Knobs - Kit of 3

Order within the next 0 mins and your part ships today!
$17.95

Broiler Pan - Large

Includes the pan and grate.

Order within the next 0 mins and your part ships today!
$4.48

SCREW

Order within the next 0 mins and your part ships today!
$4.49

Light Cover

Order within the next 0 mins and your part ships today!
$1.93

Screw

This screw is sold individually.

Order within the next 0 mins and your part ships today!
$2.79

Screw

Sold Individually.

Order within the next 0 mins and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

bake element shorted out, sparking like a sparkler

  • Customer: Carl from Wynnewood PA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 57 of 61 people found this instruction helpful
first, made sure circuit breaker was off
second, used nut driver to remove 2 screws on old element, pulled it from the back of the oven
third, removed 2 wires from old element (spade connectors)
fourth, connected new element and pushed back into oven.
fifth, reinstalled 2 screws securing new element

this was all done by my 15 y... read more

The broiler element caught fire and burned out while I was broiling a steak.

  • Customer: Dianne from Rockville MD
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 35 of 41 people found this instruction helpful
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches, but I had not turned off the power.
So, I shorted out one of the wires. Then I turned off the power but was afraid to go any farther.
An appliance repairman was at my house that day fixing my dryer seal. He was able to pull the wires through... read more

oven door seal was old and falling apart

  • Customer: eric from washington DC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 26 of 31 people found this instruction helpful
at first thought the seal would just slide out and the same for the replacement. when I realized that this was not the case and began to wonder what....? I saw the screws at top and bottom, took them off and voila the inner shell moved forward enough to take out the old, slide in the new, push in, replace the screws and back to a happy wife with an oven tha... read more