Models > RJ742G*T6

RJ742G*T6 Hotpoint Range - Overview

Get Parts and Repair Help for RJ742G*T6

If you know the range repair part you need, you can browse the list of all parts on the RJ742G*T6, or you can search by name or part description. You can also find your part by where it is located on the RJ742G*T6 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the RJ742G*T6 [Viewing 1 of 1]

$21.09

Bake Element - 240V

This bake element kit comes with two installation screws.

$27.42

Broil Element

The depth of the screw-on terminals is 2-3/4 inches and they are 1-1/4 inches apart.

$4.41

Light Cover

$1.34

Screws - Package of 12

$16.87

Broiler Pan - Large

Includes the pan and grate.

$36.73

Clock Knob Kit - 3 Pack - Chrome

These are chrome and will look differently than what you see in these photos.

$90.96

Oven Door Gasket

$26.28

Neon Indicator Light

$16.45

Broil Element Support

This part supports the broil element in the oven.

$6.41

SCREW-PKG 12

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Replacment of the bake unit

  • Customer: Beth from Matthews NC
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Socket set
  • 466 of 467 people found this instruction helpful
The hardest part was removing the old nuthead screws off the old bake burner. Once those were off installing the new bake element was simple. One screw in each wire terminal, two hex head screws to hold the unit in place. Works like a charm! read more

oven lower burner burned out

  • Customer: james from franklin TN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 457 of 534 people found this instruction helpful
Very easy, remove two screws, pull burner unit out slightly, then remove the two screws attaching the wires, one to each side, remove old unit and replace with new unit and replace screws.

Works fine perfect replacement. read more

Bake element was on its last legs, starting to crack but still functional.

  • Customer: Lawrence from San Jose CA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 205 of 348 people found this instruction helpful
Removed the racks, unscrewed the back plate which holds the element, unscrewed the leads from the element, removed the old part.

Reversed the process to install the new element.

Turned the oven on for a few minutes to burn any contaminates off the new element, replaced the racks.

And that was it; quite easy. read more