Quick Question!

Have you ever purchased from PartSelect.com before?

Models > RH123A2

RH123A2 Whirlpool Air Conditioner - Overview

Get Parts and Repair Help for RH123A2

If you know the air conditioner repair part you need, you can browse the list of all parts on the RH123A2, or you can search by name or part description. You can also find your part by where it is located on the RH123A2 by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Manuals & Care Guides for RH123A2

Click to download
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.75

Hex Nut

This hex nut is an authentic Whirlpool part that is sourced directly from the original equipment manufacturer, and will fit a variety of appliances including ovens, microwaves, ref...

$3.02

Single Hex Head Screw

Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".

$30.25

Silicone Rubber Adhesive - 2 oz

Silicone rubber adhesive is a high temperature adhesive that is used for gaskets on dryers and felt seals. It is used on many different appliances for many different application re...

$4.87

Control Knob

This air conditioner control knob is gray in color, and measures approximately 1 inch in diameter. This replacement part allows you to properly control all the air conditioner settings. If your knob has broken or gone missing it will need to be replaced. This repair requires no tools to complete. You simply remove the old knob by pulling it off and press the new knob into place by lining it up with the shaft. This genuine OEM replacement knob is sold individually.

$23.20

Motor Clip

$4.87

TIE-WIRE

$40.20

Air Filter

$28.36

SEALER

$6.92

SEAL-STRIP

$4.87

SCREW

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Dosen't seem to fit.Won't go all the way on.

  • Customer: David from Nashua, NH
  • Difficulty: Very Difficult
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 3 of 10 people found this instruction helpful
put the knob on and pushed it as far as it would go. read more

Both motor clips broken - >40 year old dryer!!

  • Customer: susan from Socorro, NM
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required:
  • 0 of 2 people found this instruction helpful
Removed the back - Saw the broken clips on the base of the dryer (the wires to the motor were pulling out because the motor was slipping).

Guessed that the parts were motor clips (no pix in the web site!)

Got the parts in post - they were identical except needed some rubber grips inside to hold tight (Used pieces of bike tire inner tube... read more