Models > RH1000RDW00

RH1000RDW00 Roper Freezer - Overview

Get Parts and Repair Help for RH1000RDW00

If you know the freezer repair part you need, you can browse the list of all parts on the RH1000RDW00, or you can search by name or part description. You can also find your part by where it is located on the RH1000RDW00 by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the RH1000RDW00 [Viewing 3 of 3]

$2.70

Screw

This screw is sold individually.

$5.25

Touch-Up Paint - White

$2.70

Cover Screw

Sold individually.

$31.72

BASKET

$29.35

RIVET

$4.46

RIVET

$68.76

HINGE-DOOR

$27.82

DRIER-TUBE

$23.22

PRIMER

$9.37

ADPTR-HOSE

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

My refrigerator stopped cooling and the freezer section stopped freezing

  • Customer: garth from forest lake MN
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 103 of 112 people found this instruction helpful
I knew the chances of all the freon leaking out was unlikely so I looked at the wiring to the compressor and there was a capacitor and a starter/overload so i figured I would start there. I went on line and found the parts at this site and they were less than the minimum service call charge for a service tech so I figured what the heck let's give her a shot ... read more

Scratches in Surface

  • Customer: Michelle from Richardson TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 10 of 12 people found this instruction helpful
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great. read more

The Freezer defrosted and everything on the top and the bottom spoiled

  • Customer: Jorge from Miami FL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 5 of 7 people found this instruction helpful
i had used your web site before and i read several problems that your readers had. i went to the back of the unit, removed the bottom cover and right there the i found the run capacitor and i chaged it. since i had only ordered this part to save money i went back and ordered the Start Device which when i took it off it was completely burned. the replacement ... read more