Models > RH0599REW00

RH0599REW00 Roper Freezer - Overview

Get Parts and Repair Help for RH0599REW00

If you know the freezer repair part you need, you can browse the list of all parts on the RH0599REW00, or you can search by name or part description. You can also find your part by where it is located on the RH0599REW00 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your freezer. We’ve also included any installation videos we have for RH0599REW00 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the RH0599REW00 [Viewing 3 of 3]

$37.17

Run Capacitor

This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.

$2.70

Screw

This screw is sold individually.

$5.54

Touch-Up Paint - White

$29.35

RIVET

$4.46

RIVET

$367.20

Compressor Kit - 1/5hp 585 BTU

This kit includes the relay, overload, start capacitor and drier.

RELAY-STRT

$26.58

DRIER-TUBE

$21.25

PRIMER

$9.57

ADPTR-HOSE

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

My refrigerator stopped cooling and the freezer section stopped freezing

  • Customer: garth from forest lake MN
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 97 of 105 people found this instruction helpful
I knew the chances of all the freon leaking out was unlikely so I looked at the wiring to the compressor and there was a capacitor and a starter/overload so i figured I would start there. I went on line and found the parts at this site and they were less than the minimum service call charge for a service tech so I figured what the heck let's give her a shot ... read more

Scratches in Surface

  • Customer: Michelle from Richardson TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 10 of 12 people found this instruction helpful
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great. read more

freezer wasn't cooling

  • Customer: James from Paden City WV
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Wrench(Adjustable)
  • 5 of 7 people found this instruction helpful
Unpluged the freezer
Removed the knob from the thermostat.
Removed the nut securing the thermostat
Removed the wires from the thermostat
Removed the sensing bulb from the bottom of the freezer by sliding it out, after marking with tape to get the insertion length.

Secured the new thermostat with the new nut and threaded the ne... read more