Models > RGB745GEV3WH

RGB745GEV3WH Hotpoint Range - Overview

Get Parts and Repair Help for RGB745GEV3WH

If you know the range repair part you need, you can browse the list of all parts on the RGB745GEV3WH, or you can search by name or part description. You can also find your part by where it is located on the RGB745GEV3WH by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for RGB745GEV3WH parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.82

Light Bulb - 40W

Sold individually.

$69.05

Round Style Oven Igniter

Be very careful when handling this igniter as it is very fragile. This igniter has a range of 2.5 to 3.0 amps. Please note - this will not replace the flat style igniters. Also known as bake and broil igniter.

$39.65

Oven Rack

Sold individually.

$1.27

Lens

$23.27

Surface Burner Spark Electrode

This part helps your burner ignite and produce flame.

$1.70

Drawer Support

$18.16

Double Burner Pan - Right Side

$18.16

Double Burner Pan - Left Side

$5.55

Oven Light Socket - With Push In Receptacle

$2.36

SCREW

Sold Individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

broiler works, bake oven does not work.

  • Customer: Robert from Hebron CT
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers, Socket set, Wrench set
  • 423 of 516 people found this instruction helpful
Your website help me troubleshoot the problem and locate the part. Part was delivered the next day. Following the instructions that others on your website had provided, the repair was quick and SUCCESSFUL.
Gas will not flow if the igniter is bad. Gas will only flow if the igniter heats up the internal bimetal strip which in turn, allows gas to flow t... read more

Oven igniter failed to heat up and ignite the gas burner.

  • Customer: Paul from Santa Rosa CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Socket set
  • 218 of 293 people found this instruction helpful
Before starting it's a good idea to disconnect the electricity and turn the gas valve off behind the stove.

Next, uncrew the two finger-screws at the back of the oven that hold the porcelain & steel drip plate in. It comes out if you push it towards the back of the oven and lift it out. This reveals the burner and the cylindrical igniter attac... read more

Oven would no longer light, main gas valve would not open, no glow from igniter

  • Customer: Jeffrey from Crystal Lake IL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 134 of 202 people found this instruction helpful
The repair was fairly straight forward.

Step 1: Remove the storage drawer from below the oven and disconnect A/C power.
Step 2: Using nutdriver, remove the 2 machine screws in the front and 2 on the sides that hold the silver cover plate under the oven.
Step 3: Disconnect the 2 wires going to the igniter and remove the 2 bolts holding... read more