Models
>
RGB524EJ3
RGB524EJ3 Hotpoint Range - Overview
Sections of the RGB524EJ3
[Viewing 3 of 3]Keep searches simple, eg. "belt" or "pump".
Thermostat Knob
PartSelect #: PS249097
Manufacturer #: WB3X694
This knob accepts a D-shaped shaft.
No Longer Available
Igniter
PartSelect #: PS243691
Manufacturer #: WB2X9697
Used for both the bake and broil.
$208.97
Special Order
Questions And Answers for RGB524EJ3
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The oven was not igniting. The heating element was not turning red hot.
First, I pulled out the two lower drawers to access the gas shut off valve. Turned it off by using adjustable wrench and turning counter-clockwise. Then I removed the old igniter - and pulled the two wires and twist caps thru the back hole. it had continuity, but it was 220 ohms. Google research said if the resistance is too high, not
... Read more
enough current will flow to flip the safety valve and/or heat the heating element.
Order the replacement. When I unboxed it, I measured the resistance at 176 ohms. I thought that was a bit high. Installed it anyway, and after turning on the gas at the shut off valve, I turned on the oven. I immediately heard a snap/pop - and found the heating element had broken. I called PartSelect - and they immediately sent me another one - giving me a refund for the first one to cancel out the charge, then charging me anew for the second one.
The second one measured resistance at 68 ohms. That was much better - since resistance in igniters increase with age - 68 is good compared to 220 ohms. Needless to say - re-installed, and it worked like a charm.
Tip - you can remove the oven doors. Each door hinge has a latch. Flip them up. Door lifts straight out. Made the job so much easier.
Order the replacement. When I unboxed it, I measured the resistance at 176 ohms. I thought that was a bit high. Installed it anyway, and after turning on the gas at the shut off valve, I turned on the oven. I immediately heard a snap/pop - and found the heating element had broken. I called PartSelect - and they immediately sent me another one - giving me a refund for the first one to cancel out the charge, then charging me anew for the second one.
The second one measured resistance at 68 ohms. That was much better - since resistance in igniters increase with age - 68 is good compared to 220 ohms. Needless to say - re-installed, and it worked like a charm.
Tip - you can remove the oven doors. Each door hinge has a latch. Flip them up. Door lifts straight out. Made the job so much easier.
Read less
Parts Used:
-
Dexter from ASHBURN, VA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Socket set, Wrench (Adjustable)
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!