Models > RG74BF3

RG74BF3 Frigidaire Oven - Overview

Get Parts and Repair Help for RG74BF3

If you know the oven repair part you need, you can browse the list of all parts on the RG74BF3, or you can search by name or part description. You can also find your part by where it is located on the RG74BF3 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your oven. We’ve also included any installation videos we have for RG74BF3 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the RG74BF3 [Viewing 3 of 3]

$3.51

Main Terminal Block Kit

$18.75

Light Bulb Lens

This lens covers the interior oven light bulb.

$34.64

Rack

$94.52

Bake Element

This bake element is found on the bottom of the oven.

$3.41

CLIP

$135.70

Broil Element

This broil element is found on the roof of the oven cavity.

$116.16

Selector/Thermostat Knob

This knob accepts a double-flat shaft.

$67.59

Oven Door Seal with Metal Clips

$30.25

Light Lens Retainer Clip

This retainer secures the light lens to the oven cavity.

$17.20

KNOB

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Element showed a hot spot prior to failing open.

  • Customer: James from Delaware OH
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 15 of 17 people found this instruction helpful
Replaced element. Removed shelves, removed two screws and lifted/wiggles old element out to pull wires off at connectors. Reversed process installing new element and truned on to test/burn off "newness" Done! read more

Cord was not tightened enough by delivery crew.

  • Customer: Timothy from Spring Valley AL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 24 of 45 people found this instruction helpful
PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools needed are phillips screw... read more

Bad lower oven coil

  • Customer: jack from atlanta GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 3 of 4 people found this instruction helpful
turned off power, removed 2 screws replaced heater coil tightened screws. read more