Models
>
RG2300NGSFR0
RG2300NGSFR0 General Electric Refrigerator - Overview
Sections of the RG2300NGSFR0
[Viewing 1 of 1]Keep searches simple, eg. "belt" or "pump".
Add-On Icemaker Assembly
PartSelect #: PS10054643
Manufacturer #: IM6D
This is a complete add-on icemaker kit that is used on GE models manufactured from 1987 to present. This kit includes the water inlet valve, fill tube, ice bin, and all required hardware and tubing.
$253.42
In Stock
REFRIGERATOR DOOR LIGHT SWITCH
PartSelect #: PS17137894
Manufacturer #: WG03A03078
No Longer Available
BRACKET COND FAN (Mounting)
PartSelect #: PS8765476
Manufacturer #: 197D2722P001
No Longer Available
Questions And Answers for RG2300NGSFR0
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the RG2300NGSFR0
[Viewing 1 of 1]Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
No Ice
After verifying that my water solenoid valve did open and close (I removed the solenoid and put my own 120vac on it and blew through it) and then I verified that I was receiving my 120vac from the ice maker itself I knew my problem was in the ice maker itself. Just removed the mounting screws holding the old ice maker and it lifted out of
... Read more
place after unplugging the unit from electrical connection at the rear of the cabinet. Reversed the process for installation. Power unit up. Bleed air out of the water line feeding the watermaker. Waited a couple of hours and my first cubes where there. Filled up quick! Thanks.
Read less
Parts Used:
-
Michael from Calvin, LA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
24 of 33 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Add and Ice maker to a Kenmore Refridgerator
Ordered the complete kit minus the water tap. Should have ordered that also. Install was difficult simply because I was not sure of the style of the fridge. No ident had been left on the unit, so I used the p;ictures in the install kit to decide the proper install. Was very quick and the parts were great. After I went under the house
... Read more
(crawl space) I found an old water tap which broke off in my hand and started spewing water. Replaced everything and it runs great. Nice kit with a lot of instructions. Fantastic ordering fromyour company. Next day delivery was unexpected.
Read less
Parts Used:
-
Philip from Cape May, NJ
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers, Wrench set
18 of 24 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker was not making ice
Unplugged the old ice maker. Removed the two screws that held it in. Removed the old ice maker and replaced it with the new one. Put back the two screws, plugged it back in and turned on the power switch. It started making and dropping ice in the first 1/2 hour.
Parts Used:
-
Larry from Virginia Beach, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
10 of 13 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!