The French door divider spring fits most Samsung French door style refrigerators. The spring applies tension between components in the refrigerator, which engages and retracts the door flap. This will...
$13.24
In Stock
Order within the next 7 hrs and your part ships today!
This pin acts as a sleeve for the French door spring in a refrigerator. This is a genuine OEM part that is sold individually and works with the spring within the door mullion to seal the door shut. If...
$4.18
In Stock
Order within the next 7 hrs and your part ships today!
This is a French door hinge that is compatible with various models of refrigerators and is used to control the mullion (long plastic strips) on the inside portion of the French doors. If you notice th...
$8.53
In Stock
Order within the next 7 hrs and your part ships today!
This evaporator fan motor is in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated. When the evaporator ...
$137.25
In Stock
Order within the next 7 hrs and your part ships today!
This evaporator fan motor is sourced from the original manufacturer for use in refrigerators. It circulates cold air throughout the refrigerator compartment to maintain consistent cooling. If the evap...
$136.42
In Stock
Order within the next 7 hrs and your part ships today!
Order within the next 7 hrs and your part ships today!
Questions And Answers for RF267ABRS
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Thomas
June 25, 2021
I have water, then ice forming on the bottom of the ref. Usually this has been from defrost tube being plugged. The tube is clean so the water is coming from another source. Water seems to be on the left (as you look at it) side.Thanks
For model number RF267ABRS
Hi Thomas,
Thank you for your question. If there is water leaking inside the refrigerator, you will need to check the water lines to see if they are clogged or cracked. You will also need to check the water inlet valve and the ice maker to see if the water is coming from them. We hope this helps! Good luck with the repair!
Spacesaver icemaker stopped working. Does not appear to have frozen up.
For model number RF267ABRS
Hi Sandie, thank you for your question. There are two parts that you should check for this issue. The first part to test would be your water inlet valve. The valve has two solenoids that control either the dispenser or the ice maker. Even if your dispenser is working the ice maker solenoid may not be and vise versa. The valve can be tested with a multi meter and should be reading between 500 - 1500 ohms of resistance. If that part is testing correctly then you should look into your ice maker being the issue. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Patrese
March 22, 2022
I need to change the incandescent bulb in the top of the refrigerator. The cover seems to be stuck. How do you remove it. Does it drop down from the front or back? Thanks.
For model number RF267ABRS
Hi Patrese,
Thank you for your question. There are tabs that hold the cover in place. To remove the cover push the cover towards the back of the refrigerator to release the tabs in the front and then remove the cover from the refrigerator. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Barb
February 28, 2023
The light went out in my unit. I replaced the bulbs but still have no light. I removed the light assembly and there is nothing there except a little round black plastic object that the power runs through.
For model number RF267ABRS
Hello Barb, thank you for reaching out. According to our research on your model, the issue is probably related to the Door Switch, part number PS4138735. The Door Switch turns the light off when you close the door. We hope this solves your problem!
Ice formed behind refrigerator back wall and under freezer drawer
For model number RF267ABRS
Hi Geraldine, thank you for contacting us. We believe your refrigerator is having this problem because of the faulty control board, part number PS4139770. It manages the functions of the refrigerator such as cooling and defrost times. We would recommend replacing it to fix the issue. We hope this helps!
OMG seriously! I stopped into my go-to appliance repair shop to ask about what might be needed to repair the problem with my refrigerator door. They said you will need to replace the Mullion Flap piece. Cost would be $250-300 with part, labor and service. I went on line to see if I could handle the repair process myself. I found a How to
... Read more - U Tube video and turns out I only needed to replace a little spring and pin not the whole Mullion Flap. Went to Parts select, ordered the spring and pin and did the repair myself in about 5 minutes. Shipping was $7 so I ended up paying $13 total.
The installation video notes that the door mullion spring has a bent end, and that the bent end of the spring is to be inserted into the LOWER hinge. However, on my refrigerator door, the bent end of the door mullion spring must be inserted into the UPPER hinge in order for the door to function properly. (Also noted that in your video t
... Read morehe installer manually closed the door mullion rather than just closing the refrigerator door, another indication that the installation of the spring was incorrect.) After watching the video several times to confirm I was installing the door mullion spring according to the video instructions, I tried inserting the bent end of the door mullion spring into the upper hinge, which proved to be the correct installation of the door mull spring. What should have been a 5 minute repair turned into an ½ hour repair.
There is a pretty good video about this on youtube, but complications arose nonetheless. The replacement spring supplied by Partselect is a bit different from the original in two ways. First, it is made of heavier-gauge wire; this is a good thing for durability, but it makes installation tougher. Second, the ends of the spring, which a
... Read morere bent at right angles to the spring axis in order to fit into the plastic sleeves that hold the spring ends, are far too long. Once I figured this out, i snipped the ends down by a quarter inch or so, and they fit into the sleeves just fine after a certain amount of persuasion from needle-nose pliers. All things considered, it was a bit harder than it should have been, but the door works now, so all is well.
