Models
>
RF266AZPNXAA
RF266AZPNXAA Samsung Refrigerator - Overview
Sections of the RF266AZPNXAA
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
HINGE-FRENCH;AW-PJT,PC(H
PartSelect #: PS4143931
Manufacturer #: DA61-03230B
This is a French door hinge that is compatible with various models of refrigerators and is used to control the mullion (long plastic strips) on the inside portion of the French doors. If you notice th...
$8.53
In Stock
Ice Cube Tray
PartSelect #: PS4149221
Manufacturer #: DA63-02284B
The ice maker cube tray holds the water that comes from the ice maker during the process of it becoming ice. This part is white in color and made of plastic. All you will need for this repair is a fla...
$70.43
In Stock
Refrigerator Evaporator Fan Motor
PartSelect #: PS4138377
Manufacturer #: DA31-00146H
This evaporator fan motor is sourced from the original manufacturer for use in refrigerators. It circulates cold air throughout the refrigerator compartment to maintain consistent cooling. If the evap...
$136.42
In Stock
Freezer Door Handle
PartSelect #: PS4176693
Manufacturer #: DA97-12712C
This refrigerator door handle is a genuine OEM replacement part that is designed for Samsung freezers. The silver handle is made from high-strength aluminum alloy and coating. It is attached to the ou...
$209.05
In Stock
Refrigerator Water Filter
PartSelect #: PS17537649
Manufacturer #: HAF-CU1/XAA
This genuine OEM water filter is made for your side-by-side or French door refrigerator, working to reduce impurities like iron, chlorine, and rust for better-tasting water. With a capacity of 300 gal...
$105.52
In Stock
Handle End Cap - Gray - Left Side
PartSelect #: PS4158522
Manufacturer #: DA67-02057A
This handle end cap, also known as a handle mount cap, is compatible with various models of Samsung freezers. This stainless-steel cap has dimensions of approximately 4 inches in length and 2 inches i...
$43.28
In Stock
Handle End Cap - Gray - Right Side
PartSelect #: PS4158519
Manufacturer #: DA67-02056A
This handle end cap, also known as a door handle mounting cap, is a genuine OEM replacement part for Samsung Freezers. It is a gray, stainless steel cap, with measurements of approximately 4 inches by...
$39.39
In Stock
Door Gasket Assembly - Refrigerator
PartSelect #: PS4173207
Manufacturer #: DA97-05253B
Assembly-GASKET DOOR REF;AW-
$117.02
In Stock
Questions And Answers for RF266AZPNXAA
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the RF266AZPNXAA
[Viewing 3 of 3]Door won’t open or close
Fixed by
these parts
these parts
Show All
Fridge too warm
Fixed by
these parts
these parts
Show All
Ice maker not making ice
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Installed caps on broken lower handle
Unscrewed broken caps and installed new ones
Parts Used:
-
Gary from SAUTEE, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Freezer handle had broken free from the left side of the door.
On both sides of the door there is a pop off cover that houses the broken mechanism. I popped off the cover and exposed the screws the attached the handle to the opening mechanism. removing those screws I removed the handle from the freezer door. I replaced the broken plastic piece on the handle . Reattached the repaired handle assembly t
... Read more
o the door with the 4 screws. Reinstalled the cover.
Read less
Parts Used:
-
Kathleen from FLORISSANT, MO
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice tray had cracked and broken. The water is still not filling up my ice tray.
The replacement was fairly simple. I removed the existing tray and detached the water line. Once the water line water reattached to the new tray I inserted into the ice maker.
*** The problem I'm having now is the water is not filling up the tray***
Not sure what I did wrong? Any help would be greatly appreciated!!!
*** The problem I'm having now is the water is not filling up the tray***
Not sure what I did wrong? Any help would be greatly appreciated!!!
Parts Used:
-
Timothy from SALISBURY, NC
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
4 of 17 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!