The ice maker cube tray holds the water that comes from the ice maker during the process of it becoming ice. This part is white in color and made of plastic. All you will need for this repair is a fla...
This evaporator fan motor is sourced from the original manufacturer for use in refrigerators. It circulates cold air throughout the refrigerator compartment to maintain consistent cooling. If the evap...
This genuine OEM water filter is made for your side-by-side or French door refrigerator, working to reduce impurities like iron, chlorine, and rust for better-tasting water. With a capacity of 300 gal...
This handle end cap, also known as a handle mount cap, is compatible with various models of Samsung freezers. This stainless-steel cap has dimensions of approximately 4 inches in length and 2 inches i...
This handle end cap, also known as a door handle mounting cap, is a genuine OEM replacement part for Samsung Freezers. It is a gray, stainless steel cap, with measurements of approximately 4 inches by...
This refrigerator filter case assembly, also known as a water filter head or housing, is compatible with various models of Samsung fridges. The assembly includes the filter head and water lines. It is...
It was simple. I pulled out the old seal from the track it was tucked in and put the new one in using a wood spatula to help along the folding part of the door that fits behind the other door. I replaced both seals under 15 minutes. I am a 63 year old female so I know if I can do it so can you! Tip: make sure that you line up the to
... Read morep and bottom and from side to side evenly before you start pressing it into the track. Refrigerator is working properly now.
On both sides of the door there is a pop off cover that houses the broken mechanism. I popped off the cover and exposed the screws the attached the handle to the opening mechanism. removing those screws I removed the handle from the freezer door. I replaced the broken plastic piece on the handle . Reattached the repaired handle assembly t
... Read moreo the door with the 4 screws. Reinstalled the cover.