REX4634KQ1 Roper Dryer - Instructions

I watched the video that showed how to do the repair. I did exactly what I was shown on the video, and everything worked the very first time ! It was GREAT ! No more squeaking idle pulley !

turn off elec./disconnect at recep.- remove vent pipe- remove back of dryer- remove each part and re-install new part- relaced thermal cut-off, thermostat, fuse, and heat element...time about 30 min. also vacuumed dryer and vent pipe-time less than 15 min.- parts arrived day after they were ordered.

turn off elec./disconnect at recep.- remove vent pipe- remove back of dryer- remove each part and re-install new part- relaced thermal cut-off, thermostat, fuse, and heat element...time about 30 min. also vacuumed dryer and vent pipe-time less than 15 min.- parts arrived day after they were ordered.

turn off elec./disconnect at recep.- remove vent pipe- remove back of dryer- remove each part and re-install new part- relaced thermal cut-off, thermostat, fuse, and heat element...time about 30 min. also vacuumed dryer and vent pipe-time less than 15 min.- parts arrived day after they were ordered.

replace fuse and cycling thermostat. both were next to each other. very easy to do.

Followed the video from this site. Worked like a charm.

took off the back pannel, testedt the continuity of the heating coils, instaled new heater element. supper easy.

I removed the Back cover shield about 8 screws, found the thermal fuse, removed and replaced. (2 screws) Then I tested and had heat! I didn't need the cycling thermosat but all and all saved money by doing it myself.

If your dryer is not heating when turned on, first check your circuit breakers. Dryers with 220 volt have 2 - 110 volt circuit breakers attached to each other. If you don't find any breakers tripped the next thing you should do is disconnect the dryer from all power sources. With a multi meter check the 220 volt wall outlet for 110 volts on each side. Then check for 220 volts when attached together. If that all checks good then it's time to move to the heating element. Simply remove the back cover from dryer (dryer must be unplugged from all power sources) at the bottom right you'll find the hearing element connection. Disconnect both connectors and check for continuity. If no continuity then chances are your hearing element has a break in one of the coils.

The dryer would not start when pushing the power button and the timer clicked rapidly. Another You Tube video lead us to the thermal fuse. First, we took the lower front panel off, it had two little groove places to pry open with a flat head screwdriver. Then we took off the venting piece. It was jammed full of lint which is why the thermal fuse blew. The thermal fuse itself was tricky to get at the nut in order to loosen it. We vacuumed out all the lint, cleaned the venting piece and lint filter. When the part came, again the nut was tricky, but just requires patience. Put everything back together and the dryer works great again! Really easy and I wonder how many dryers get replaced when this happens.

Removed rear trim cover and vent hose, removed heating element, checked print and unplugged stay-con connections to haeter and thermal. Coil was burnt in two, got on net for kenmore parts and entered # on the part.Recieved in 3 days FEDEX and installed in reverse order. Works like new!

Fast shipping. Part arrived the next day!

I followed the instructions you supplied. All went well. The short movie that you supplied was fine but the only tricky part which included placing the belt over the idler wheel was not well done in that the repairman's arm covered the work area. Delivery time was excellent.

I woke up one morning to the dryer not working. Every company that I called wanted to charge a high price to come check the dryer. I decided to get on YouTube to troubleshoot the issue. There were a few videos that I saw, but the video for partselect was the best one I saw. I decided to explore the site to see if there was something I could do to fix it. I love the Instant appliance repair help, where you give the issue and it tells you what the problem most likely is. When I put in my model number, it said that it was most likely the thermal fuse or thermostat. I decided to get both since they were inexpensive. I received the part within a couple of days. I decided to come back to the site to make sure I was putting the part in correctly. If it wasn't for this site, I would have been paying hundreds of dollars instead of the $30 that I spent. Thanks so much PartSelect!!!!!!

Removed dryer back (8 screws) removed & replaced heat element (2 screws) r&r'd fuse (2 screws) replaced back. Tested good. My wife was thrilled.