Models > REX3514PQ0 > Parts

REX3514PQ0 Roper Dryer - Parts

All parts for the Roper Dryer REX3514PQ0

Below is a list of all parts for the Roper Dryer REX3514PQ0 - Residential. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the REX3514PQ0
15-28 of 110
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?


This screw is sold individually.


Blower Wheel

The blower wheel is a squirrel cage type wheel whose purpose is to move the air through the room or appliance.


Cover Screw

Sold individually.


Cycling Thermostat - Limit: 135/155

Cycling themostats continually cycle the heating element off and on to maintain a constant inner temperature within the dryer. This particular cycling thermostat can be adjusted between 135 and 155 degrees Fahrenheit. The differential of this thermostat is 20 degrees, meaning that with this thermostat, the heating element will cycle back on once the internal temperature drops by 20 degrees.


Touch-Up Paint - White



Lint Trap Housing Seal

This seal comes with the adhesive backing.


Door Catch

This white female door catch is attached to the dryer door.


Spray Paint - 12 oz. - White


Screw with Washer

This metallic screw is less than an inch long and comes with a plastic washer.


Lint Chute Seal

This seal comes with the adhesive backing.


Leveling Leg Locking Nut

This nut is sold individually. Size: 3/8-16


D-Shaped Knob Insert

This insert is sold individually. Knob not included. Knob is sold separately.


Single Front Panel Cip

Sold Individually.


Terminal Block - Block Only

This part is an electrical connector where you can attach wires. This part does NOT included the wires, screws, and nuts. Must be order separately

All Parts for the REX3514PQ0
15-28 of 110