RES7745RQ0 Roper Dryer - Instructions

I went to partselect.com, input my model number and problem, I clicked on the right solution and watched a short video on how to repair the problem. Ordered the parts which arrived the next day. It took me ten minutes to replace the two parts I had ordered and the problem was solved. I probably saved a couple hundred dollars doing this repair myself..

Replaced Thermal Fuse

Your website was wonderful--thank you so much! When I saw that 47% of the time this was the problem, I ordered it & it worked! This was a life saver for me! I will come back to this site anytime I have an appliance problem! Thanks again!

I would like to thank the people who created this site. My husband recently passed away from stage 4 esophageal cancer. We only knew he had it for five weeks before he passed. With the medical bills he left behind, I really could not afford to buy a new dryer or hire anyone to fix mine. I do not remember how I found Parts Select but I'm thrilled I did. I first used an ohm meter to find the defective part. Then I followed the step by step video and was able to completely fix my dryer in about an hour. Changing the connectors on the thermal cut-off was a bit of a challenge for me but I managed. I also changed the switch on the door which allows the dryer to shut off when the door is opened. I am truely grateful for this site and will highly recommend it to all my friends and family.

I went to parts select website to find out how to repair it myself because when I took the heating coil off I could tell just by looking at it that it was not broke or cracked in anyway so I went to the website to get an idea of how to start diagnosing were the real problem actually was and I found everything I needed from step by step instructions to diagrams and symptom diagnosis and actual pictures of the parts themselfs.

took the top and front off the dryer and had to route the new belt around the drum and through the pulleys, it was really easy and a heck of a lot cheaper then buying a new dryer

Called PartSelect, gave them the make and model number of the dryer and told them I needed a new belt for it. They gave me a price including shipment (under $20.00). I oreder the new belt and it arrived within a week. I also got an e-mail from PartSelect with a video showing how to replace the belt. This was very helpful. I was able to watch the video, take the dryer apart, replace the belt (after a few tries), and put the dryer back together. Problem solved! Thanks PartSelect.

I replaced the thermal fuse and the cycling thermostat, it was quite easy you need a 1/4 nut driver and remove the back of the machine and the two items are there in plain view simply remove and replace and voila,I am a woman with more knowledge of how things don't work when broken but laundry was going to pile up and I was desperate and couldn't afford to call a repair man and the husband doesn't fix things he doesn't use and he was planning on stringing clothes line throughout the house to remedy the problem :( it took me about 45 minutes but that included finding anything I might need and vacuuming and cleaningthe dryer and vents had I called a repairman I may have ran off with him ;) felt amazing when I turned it on and it worked perfectly!

very easy had to do some rewirng.who ever had it before me bypassed the fuse and several other things.

followed instructions from tutorial , so simple a child could do it.

Followed Video made this repair plus changed 3 sensors and changed fuse 2 times so far still no low heat

I got on line and searched for parts. I called Parts Select and a gentleman discussed the problem with me. He suggested what part(s) I possibly needed. He sent me the parts we discussed, (he said I would receive them withing 5 business days) I received them in 2. I watched the video which explained procedures for repair, I disassembled the dryer installed the thermostat, reassembled and with in 1/2 hour we were drying clothes. If I ever have any other problems I would call again for info. A great experience keep the good work

Just like the video. Disconnect the lint shute. Pop the top lose. Disconnect the door switch. I actually took the hooks off an removed the entire lid. Took the two screws out and removed the front panel. (The OEM idler was a teflon half-moon so I think the abrasion was what caused the belt to fail.) Put the belt around the drum. Rolled the drum to check the seal overlap was proper. Installed the idler and wrapped the belt around the motor shaft. Put it back together. Would have been a little easier with a helper.

followed the instructions given for my dryer. it took me 30 min before I could dry clothes.

Found an instructional, easy to follow video by PartSelect online. It was helpful to know what tools I needed before beginning the job. I first purchased only the belt. After taking the dryer apart, I saw the idler had also broke. It was very helpful that the parts arrived quickly. The video was the the greatest tool for doing this repair myself!!!!