Quick Question!

Have you ever purchased from PartSelect.com before?

Models > REM10F01

REM10F01 Hotpoint Microwave - Overview

Get Parts and Repair Help for REM10F01

If you know the microwave repair part you need, you can browse the list of all parts on the REM10F01, or you can search by name or part description. You can also find your part by where it is located on the REM10F01 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the REM10F01

[Viewing 1 of 1]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$22.30

Secondary Door Switch

Order within the next 10 hrs and your part ships today!
$111.86

Rectangle Glass Tray

Order within the next 10 hrs and your part ships today!
$5.10

Ceramic Fuse - 15 Amp

Order within the next 10 hrs and your part ships today!
$72.20

High Voltage Diode

This diode has a 1/4" female connection and an eyelet.

Order within the next 10 hrs and your part ships today!
$217.03

Magnetron

This part is used to generate microwave energy/heat.

Order within the next 10 hrs and your part ships today!
$13.52

SWITCH MICRO

Order within the next 10 hrs and your part ships today!
$48.83

SPRAY-MEILMOD WHITE

Order within the next 10 hrs and your part ships today!

PIN-CLIP ASM

HOLDER-FUSE

$3.35

CAM SWITCH

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

light worked, timer and control pad worked, but no turntable, no heat, no noises of any sort, just didn't start up

  • Customer: Marla from Arlington, TX
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 182 of 210 people found this instruction helpful
Noted on partselect.com that someone else with this problem, found it to be secondary door switch. There are three door switches in this model, but online info noted that one of the three might feel "soft" (in my case, one switch clicked in a rather "jiggly" way, the other two were strong decisive clicks.) To access the door switches on this model was the ... read more

Turntable won't move, no heat -but light and fan ok.

  • Customer: Sean from San Jose, CA
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 32 of 39 people found this instruction helpful
Remove the 2 Torx-15 screws at left of control panel. Work the control panel out by pulling slightly to the left first - it is engaged to the slotted holes to the right.

Remove the door's upper switch by lifting the tab and pulling out the switch carefully. To install the new switch, you may have to remove 2 philips screws holding the plastic asse... read more

Microwave Fan Turned on When Door Was Opened

  • Customer: Bishop from Coupland, TX
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 26 of 30 people found this instruction helpful
To get to the switches you need to remove the metal cover/housing of the microwave, by first removing several screws that hold it in place, and then sliding the cover towards the back of the unit. You'll find the switches in some plastic holders above the door-open button, and it's its easy to see how the mechanism engages/disengages the switches when the do... read more