REL4632DL0 Roper Dryer - Instructions

I had purchased a motor for the dryer first. The blower wheel broke while I was trying to take the motor off from the blower wheel. Installing the new wheel was fairly easy once I took the blower cover of at the back of the dryer and literally brake the wheel of the motor shaft.

Removed back panel as instructed. removed heating element saw that it was broken, put in new element, replaced back panel, and tada!! heating Thanks a million, and delivery was so fast

For 2 years, I propped a broom stick against my dryer door to keep it shut while it was running. Last Sunday night, I decided that it was about time to fix it. I found the PartSelect site, which was extremely easy to navigate, and ordered a replacement kit. It arrived in 2 days via Fed Ex and actually contained extras of each of the 2 components, in slightly different sizes. It took me about 10 minutes of eyeballing the parts to figure out how to place them and about 30 seconds to install the new latch parts. They fit perfectly. Great site, great service, I would highly recommend this site.

found out that pushing in on wheel and turning counter clock wise, wheel screws off rather easy.

Removed back of dryer and the fuse was right there in plain sight. Had to remove a screw and pull contact wires from fuse. Attached wires to new fuse, replaced screw that held fuse in place. Replaced dryer back. This web site is great! Diagnosed my problem, and then received the replacement part the next day! I will use the site again, if necessary, and recommend it to others.

I replaced the thermal fuse and it started right up.

Well it took me longer to get the dryer apart and than it did to get it back together... Well I opened it up it was obvious I had burned up the motor you couldn't even see it for all the lint that was built up around it... And the hardest part was removing the fan from the motor shaft, I didn't realize it was plastic and sort of mangled it getting it off so I went ahead and replaced it as well. The hardest part of the whole repair was removing and replacing the clips that hold the motor in place and there didn't seem to be any trick to it, I used a pair of channel locks and a little muscle to get them off and back on everything else was a breeze! I recommend checking the exhaust pipe at least once a year to make sure air is flowing freely to prevent the lint build up inside and even more often if you have a long run. This should prevent having this problem again...

At first dryer would not turn off so you had to turn it off manually. Then dryer lost heat, so I took it apart and the heating element wires had been melted. I decided to get the sensors and the heating element because I had the problem of it not shutting off before the heating element went out. Took me about 30 mins, works like a charm. Only have to do one cycle again. My advice replace the sensors if you are having to do multiple cycles and save yourself the price of a new heating element

changed the top thermastat

Read the Use & Care Guide! I spent several hours trying to repair a dryer that was not broken because I was unaware of the "lint signal". While replacing a burnt out heater element I apparently disturbed the flapper on the lint signal box and it stuck in the open position. My wife who does the laundry has always kept the lint filter clean so we had never heard the lint signal and I assumed that the high pitched sound I was hearing must have been from a faulty gasket, belt, roller, pully, or motor. Boy is my face red!

The repair could not have went better. Did just as video showed and it was up and running in 10 min..The video was very helpfull.

I don't know the proper names for everything and I'm not a handy man by any means! That's why when my husband and I were trying to figure out what was wrong, I was so proud of myself when I discovered the issue. I order the part around 4pm the next day and it was delivered at 3pm the next day even though I only paid for FedEx Ground (3-5 day) shipping. I was very very pleased with that! I was going to wait till my husband got home from work, but I decided to just try replacing it myself. I took the back of the dryer apart and unscrewed the heating element case. I used the pliers to unplug the wires. I plugged the wires into the new heating element, put everything back together, checked to make sure the dryer was heating up again and wa-la... I was done! It was sooooooo easy!! And finding the correct part on partselect.com was very simple as well.

tested thermostat fues and thermal fues.removed lint vent and both parts.replaced both parts[one screw each]replaced lint vent.easy to do.

Watched the how to video on the parts select site. The job to replace the motor was easy although I had some issues with the blower fan wheel as it is made of plastic and was frozen to the motor, yes I turned it the correct way for the left hand threads. I ended up distroying the blower fan wheel and had to buy a new one. I had to remove the rear plate to get at the fan component, but thta was easy to do also. This site should add a "Sometimes bought together" comment for the motor replacement. After all was done I read some of the other comments and found some others had the same problem with the fan wheel. Once I had all the parts the dryer went back together fairly quickly. The job was easy to do and I would believe almost anyone could do it.

replace the water valve