REL4622DL1 Roper Dryer - Instructions

Removed the broken actuator and replaced with the new one. The time to replace the dryer door switch actuator took about 5 minutes.By the way, I purchased the dryer in 1965 and it works as if it was brand new. Thank you Kenmore for a lifetime dryer.

Just as in the video. Sounds like new. Had to feel it to make sure it was running.

It took longest to take apart and test to see which part was bad. I had never done it before. Got it apart and used the drawings on Parts Select to find location of parts. Testing only few minutes found bad thermostat.Ordered parts, and they came in 1 1/2 days. I replaced both thermostats being they were in the kit. Actual repair took maybe 15 minutes. Vacuumed out everything I could. Took lint trap out a vacuumed. Put it back together, plugged it in, heated like new. All time told I would say little over hour.

two screws on filter housing and then lift dryer to up like the hood of a car the two screws on actuator, be careful not to drop actuator, if you do use a magnet to retrieve, two screws back in then wire clip top of dryer down and two screws back into filter housing and your ready to dry clothes, not recommended but if you have to dry clothes while waiting for part a clamp on the switch will allow you to use dryer, but be extremely careful because dryer will not turn off when door is opened

just replaced the rollers with the new ones. The trouble was getting the belt around the drum again, but it all worked out and the dryer is running good

Replaced Thermal Fuse

Your website was wonderful--thank you so much! When I saw that 47% of the time this was the problem, I ordered it & it worked! This was a life saver for me! I will come back to this site anytime I have an appliance problem! Thanks again!

This was replace the old worn out limt filter with a new limt filter effort. Not a difficult repair. I would call it a remove and replace job.

I would like to thank the people who created this site. My husband recently passed away from stage 4 esophageal cancer. We only knew he had it for five weeks before he passed. With the medical bills he left behind, I really could not afford to buy a new dryer or hire anyone to fix mine. I do not remember how I found Parts Select but I'm thrilled I did. I first used an ohm meter to find the defective part. Then I followed the step by step video and was able to completely fix my dryer in about an hour. Changing the connectors on the thermal cut-off was a bit of a challenge for me but I managed. I also changed the switch on the door which allows the dryer to shut off when the door is opened. I am truely grateful for this site and will highly recommend it to all my friends and family.

removed old lint filter by hand and replaced with new one.

I went to parts select website to find out how to repair it myself because when I took the heating coil off I could tell just by looking at it that it was not broke or cracked in anyway so I went to the website to get an idea of how to start diagnosing were the real problem actually was and I found everything I needed from step by step instructions to diagrams and symptom diagnosis and actual pictures of the parts themselfs.

took the top and front off the dryer and had to route the new belt around the drum and through the pulleys, it was really easy and a heck of a lot cheaper then buying a new dryer

Called PartSelect, gave them the make and model number of the dryer and told them I needed a new belt for it. They gave me a price including shipment (under $20.00). I oreder the new belt and it arrived within a week. I also got an e-mail from PartSelect with a video showing how to replace the belt. This was very helpful. I was able to watch the video, take the dryer apart, replace the belt (after a few tries), and put the dryer back together. Problem solved! Thanks PartSelect.

very easy had to do some rewirng.who ever had it before me bypassed the fuse and several other things.

followed instructions from tutorial , so simple a child could do it.