Quick Question!

Have you ever purchased from PartSelect.com before?

Models > RCC6

RCC6 (P8531802S) Amana Microwave Oven Combo - Overview

Get Parts and Repair Help for RCC6

If you know the microwave oven combo repair part you need, you can browse the list of all parts on the RCC6, or you can search by name or part description. You can also find your part by where it is located on the RCC6 by selecting a section below. We’ve also included any installation videos we have for RCC6 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.91

Light Bulb - 40W

Sold individually.

$22.22

2 Piece Broiler Pan

The top of this part is now black.

$4.63

Screw

This screw is sold individually

Gasket - sold by the foot

This gasket is gray and is made of a spongy material. This gasket is used for many air conditioners. It will come to you at the length you specify: one foot, two feet, whatever you require. When ordering over the internet, requesting a quantity of one will result in you receiving one foot of this gasket. Requesting a quantity of two will result in you receiving two feet of this gasket, and so on.

Screw - No Longer Available

This black screw is well under an inch long, and is made of metal. It is used for many air conditioners, refrigerators, and ranges.

DISCONTINUED

Bake Element - Push On Terminals

BALLAST

$4.89

NUT

NUT, SCREW

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Light Bulb burned out

  • Customer: Jeffrey from Marietta, GA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 7 of 7 people found this instruction helpful
Removed the two screws that hold the back glass in place. Rotated old bulb out of it's lamp fixture and replaced it with the new bulb. Replaced glass and reinstalled the screws.
The hardest part was finding the bulb ... a very unique 18W flourescent. I wasted a couple of hours trying to locate it locally at my regular suppliers. The order at PatsSelec... read more

Loose terminal caused block to overheat and break

  • Customer: Dana from Black Mountain, NC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 6 of 9 people found this instruction helpful
Removed all terminals and block mounting screws. Repaired one burnt terminal and reassembled. Replacement part was an exact fit and reassembly whnet very well. read more

Replacing the bulb in the freezer side

  • Customer: Yafa (and David) from Bothell, WA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 5 of 7 people found this instruction helpful
Removed the ice brucket,
Removed the light shield by releasing one screw using a nutdriver.
Replacing the bulb and reinstalled the light shield.

Your web site is one of the best and most helpfull service sites I ever used. Just wish that in the future you will ship parts overseas. read more