Models > RCC3024RB02 > Instructions

RCC3024RB02 Whirlpool Cooktop - Instructions

All installation instructions for RCC3024RB02 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the cooktop repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the RCC3024RB02
16-19 of 19
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Bowl of potatoes dropped from microwave breaking glass top

  • Customer: Darwin from Tomball TX
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Turned off electricity at service panel. Removed drawer from cabinet. Removed 2 mounting clamps from under counter. Removed knobs and grommets. Lift range from counter top. Removed 10 perimeter screws from glass mounting tabs. Removed broken glass top. Mount new glass top. Adjust position of tabs with pliers. Install 10 mounting screws. Replace range in counter top. Space above top with small sticks. Applied clear silicone to perimeter of glass at counter top. Removed spacers and seated glass to counter top. Cleaned silicone joint. Replace grommets and knobs. Replaced 2 under counter clamps. Replaced cabinet drawer. Restored power at service panel. Clean up.

Beingold the glass top stuck hard

  • Customer: Mansukhlal Dayabhai from Moultrie GA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
unscrew 3 screws under the control panel and pull that away from the glass top making sure the wires don't come apart from the connectors. care fully slide the glass forward and replace the burner which was the easy part. DO NOT try to test without making sure that none of the burner are touching the metal surface!!!!!!!! it will trip your breaker. But now we have a range with 4 burner after a year THANKS

cleaner

  • Customer: Mary from Duarte CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
just needed clearner for the top of my glass top, the operator was very helpful I received my clearniner in 7 days thank you

Large element not heating. Open heating filament on element

  • Customer: Pedro from Jacksonville NC
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Remove power from appliance, verify power is off. loosen two side screws that hold cook top to counter top. Gently push appliance up from bottom, everything from now on is done gently !. every component is very fragile. hope you have enough room to move cook top to side, if not, have help to hold it for you. #2 screwdriver, remove screws on all sides, two front, 3 sides, 3 in back. Note placement of connected wires in the affected element. # 2 screwdriver remove one screw on bar holding set of elements, lift and loosen metal spring and remove element, ply wires off with pliers. ( I suggest you clean inside cook top if needed) Note place of springs(Numbers) and remove to place on new element. reverse order to complete.
All Instructions for the RCC3024RB02
16-19 of 19