Quick Question!

Have you ever purchased from PartSelect.com before?

Models > RC8400XBN1

RC8400XBN1 Whirlpool Cooktop - Overview

Get Parts and Repair Help for RC8400XBN1

If you know the cooktop repair part you need, you can browse the list of all parts on the RC8400XBN1, or you can search by name or part description. You can also find your part by where it is located on the RC8400XBN1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. We’ve also included any installation videos we have for RC8400XBN1 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the RC8400XBN1

[Viewing 1 of 1]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$6.33

Surface Burner Stabilizer Clip Kit

This kit contains one clip, a screw, and a nut.

$11.48

Drip Bowl - 6" - Black

Sold individually.

Burner Knob

Sold Individually. This knob accepts a double-flat shaft.

$5.76

CLIP

Surface Burner Center Medallion

This black medallion sits in the center of your electric surface burner. If you need to replace the medallion for all four of your burners, you will need to order four of these.

$4.79

SEAL-SWTCH

SWITCH-INF

DISCONTINUED

SWITCH-INF

$43.31

HARDWARE

Common Symptoms of the RC8400XBN1

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

1 had 2 large burners not working at all, and was cooking everything on the 2 smaller burners

  • Customer: Mary from Lebanon, CT
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 14 of 16 people found this instruction helpful
It was so simple to repair - all I had to do was slide the older burners out and slide the new ones in - it took less than 10 min to complete the whole job! No tools used at all. read more

Original burners were not working correctly.

  • Customer: Sharon from Phoenix, AZ
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 7 of 10 people found this instruction helpful
I received my ordered in less than a week. It was great. The day I got them I remove the old burners and replaced them with the new ones. It took me about 3 minutes total. I was then able to cook my Christmas dinner with out any problems. read more

replacing the hold down clip for the burner

  • Customer: Roseanne from North Syracuse, NY
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 4 of 6 people found this instruction helpful
Started out removing the old clip that didnt hold burner element down anymore. It was a bit rough, since i was taking off a rivet. I used the screwdriver to carefully wedge the edges of the rivet upward so that i could get the wire cutters underneath it enough to snap the head off. After some fanagling for about 20 minutes, i popped it off. The rest of t... read more