Models > RC8200XBW2

RC8200XBW2 Whirlpool Cooktop - Overview

Get Parts and Repair Help for RC8200XBW2

If you know the cooktop repair part you need, you can browse the list of all parts on the RC8200XBW2, or you can search by name or part description. You can also find your part by where it is located on the RC8200XBW2 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. We’ve also included any installation videos we have for RC8200XBW2 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the RC8200XBW2 [Viewing 1 of 1]

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$5.28

Chrome Drip Bowl - 8"

This part has been substituted by the manufacturer and has a hole in the center. It no longer has a solid bottom. Sold individually.

$3.66

Drip Bowl - 6"

$7.52

Surface Burner Plug-In Block Kit

This newer-style terminal block kit includes two metal brackets, two pre-crimped wires with terminals, two ceramic wire nuts, a heat shrinking tube, and a mounting screw.

$36.38

Surface Burner - 8" - 2600W

***Please NOTE: The manufacturer recommends that you replace the burner receptacle at the same time.

$33.21

Standard Y-Frame Surface Burner - 6" - 1500W

The manufacturer suggests replacing the receptacle at the same time.

$2.82

Surface Burner Stabilizer Clip Kit

This kit contains one clip, a screw, and a nut.

$23.34

Thermostat

$4.06

SEAL-SWTCH

$26.04

Burner Knob

Sold Individually. This knob accepts a double-flat shaft.

$4.90

Mounting Clip

This mounting clip is for the surface burner receptacle of your electric range. Sold individually.

Common Symptoms of the RC8200XBW2 [Viewing 1 of 1]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Drip bowls needed to be replaced

  • Customer: John from Chester VT
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 366 of 368 people found this instruction helpful
took old bowls out, put new bowls in, took a coffee break read more

Surface elements quit working

  • Customer: Jon from Oakley CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers, Wrench set
  • 125 of 126 people found this instruction helpful
Drilled out old and broken hold down clips, installed new ones(4). Cut old wires attached to surface plug in block, striped wires, and attached new plugin kit(4), warmed up heat shrink with a hair dryer, put in new drip bowels, the stove is like new.
I ordered the parts on line early one morning, the next day they were at my door and installed that day... read more

Old drip pans stained

  • Customer: Linda from Atlanta GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 133 of 258 people found this instruction helpful
Replaced old drip pans with new ones - very easy - even a 68 yr old lady can do it!! read more