Models > RC8200XBW0

RC8200XBW0 Whirlpool Cooktop - Overview

Get Parts and Repair Help for RC8200XBW0

If you know the cooktop repair part you need, you can browse the list of all parts on the RC8200XBW0, or you can search by name or part description. You can also find your part by where it is located on the RC8200XBW0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. We’ve also included any installation videos we have for RC8200XBW0 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the RC8200XBW0 [Viewing 2 of 2]

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$4.09

Chrome Drip Bowl - 8"

This part has been substituted by the manufacturer and has a hole in the center. It no longer has a solid bottom. Sold individually.

$3.96

Drip Bowl - 6"

Sold individually. This part is located beneath the element and catches any spills.

$25.00

Surface Burner - 8" - 2600W

NOTE: The manufacturer recommends that you replace the burner receptacle at the same time.

$21.82

Standard Y-Frame Surface Burner - 6" - 1500W

The manufacturer suggests replacing the receptacle at the same time.

$4.20

Surface Burner Stabilizer Clip Kit

This kit contains one clip, a screw, and a nut.

$5.00

Mounting Clip

This mounting clip is for the surface burner receptacle of your electric range. Sold individually.

$5.74

Screw - #10 - 32x1/2

Sold Individually.

$46.18

8" Element Infinite Switch

This switch controls the stove top surface burner.

$23.82

Thermal Fuse

When the fuse trips due to a malfunction in the oven this part will trip and shut down your oven controller. It is usually located behind your control panel.

$26.56

Burner Knob

Sold Individually. This knob accepts a double-flat shaft.

Common Symptoms of the RC8200XBW0 [Viewing 1 of 1]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Drip bowls were burned and tacky

  • Customer: Donna from Dallas TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 460 of 459 people found this instruction helpful
First I removed the old bowls and replaced them with the new. read more

Drip bowls needed to be replaced

  • Customer: John from Chester VT
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 444 of 523 people found this instruction helpful
took old bowls out, put new bowls in, took a coffee break read more

Needed to replace chrome drip bowls and replace one of the hold down clip since previous owner used incorrect drip bowls and put pressure on the hold down clip.

  • Customer: Donna from Petaluma CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers, Wrench(Adjustable)
  • 210 of 409 people found this instruction helpful
Pulled out the electric element from the range, replaced the new drip bowl on three of the burners and then replaced the electric element pushing it into the hold down clip. On the fourth burner, I removed the electric outlet, the previous incorrect drip bowl and had to drill out the broke off hold down clip that was no longer there. Next I placed the new ... read more