Quick Question!

Have you ever purchased from PartSelect.com before?

Models > RC8200XBN1

RC8200XBN1 Whirlpool Cooktop - Overview

Get Parts and Repair Help for RC8200XBN1

If you know the cooktop repair part you need, you can browse the list of all parts on the RC8200XBN1, or you can search by name or part description. You can also find your part by where it is located on the RC8200XBN1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. We’ve also included any installation videos we have for RC8200XBN1 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the RC8200XBN1

[Viewing 1 of 1]

Manuals & Care Guides for RC8200XBN1

Click to download
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$4.17

Chrome Drip Bowl - 8"

This drip bowl is also known as a drip pan, and it is designed for use with cooktops and ranges. It sits below 8-inch burner elements, and catches drips and spills from the cookwar...

$4.04

Drip Bowl - 6"

This drip bowl is used for electric cooktops and ranges, it is designed to sit under a six-inch surface burner. It catches the drips and spills coming from the cookware on the surface burner. This drip bowl is chrome, and it has a diameter of 7 2/3 inches. You need to remove the burner element to replace this part. Line the hole up with the element terminal blocks, and ensure the new bowl is flush with the surface of the cooktop before replacing the burner element. Drip bowls need to be replaced when they are lost, damaged, or you are no longer able to clean them adequately. This replacement part is sold individually.

$16.54

Standard Y-Frame Surface Burner - 6" - 1500W

The standard y-frame surface burner provides heat to your range. If you notice that your element will not heat, you may need to replace your surface burner. This product is 6 inche...

$21.61

Surface Burner - 8" - 2600W

The surface burner or element on your range provides the heat that you cook with. If your element will not heat, you may need to replace the surface burner. This surface burner is 8 inches in diameter and 2600 watts. The burner element is made of metal and has two prongs that connect it to the range. The manufacturer recommends you replace the burner receptacle at the same time that you replace the surface burner. Many of our customers have rated this repair as very easy. To complete the repair simply lift the old burner up and out, and replace it with the new one. Be sure to disconnect power to the range before beginning this repair.

$6.03

Surface Burner Stabilizer Clip Kit

The surface burner stabilizer keeps your burners level and secure to your gas range. Stabilizers are used to ensure there is a constant burning of the gas-air mixture by the surfac...

$5.10

Mounting Clip

This mounting clip is for the surface burner receptacle of your electric range. Sold individually.

$4.87

Screw

Sold individually.

$27.86

Thermal Fuse

When the fuse trips due to a malfunction in the oven this part will trip and shut down your oven controller. It is usually located behind your control panel.

$8.10

Screw - #10 - 32x1/2

Sold Individually.

$17.36

SEAL-SWTCH

Common Symptoms of the RC8200XBN1

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Drip bowls were burned and tacky

  • Customer: Donna from Dallas, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 461 of 462 people found this instruction helpful
First I removed the old bowls and replaced them with the new. read more

Drip bowls needed to be replaced

  • Customer: John from Chester, VT
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 447 of 529 people found this instruction helpful
took old bowls out, put new bowls in, took a coffee break read more

Needed to replace chrome drip bowls and replace one of the hold down clip since previous owner used incorrect drip bowls and put pressure on the hold down clip.

  • Customer: Donna from Petaluma, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers, Wrench (Adjustable)
  • 210 of 409 people found this instruction helpful
Pulled out the electric element from the range, replaced the new drip bowl on three of the burners and then replaced the electric element pushing it into the hold down clip. On the fourth burner, I removed the electric outlet, the previous incorrect drip bowl and had to drill out the broke off hold down clip that was no longer there. Next I placed the new ... read more