Models > RBD275PDQ7

RBD275PDQ7 Whirlpool Oven - Overview

Get Parts and Repair Help for RBD275PDQ7

If you know the oven repair part you need, you can browse the list of all parts on the RBD275PDQ7, or you can search by name or part description. You can also find your part by where it is located on the RBD275PDQ7 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your oven. We’ve also included any installation videos we have for RBD275PDQ7 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$42.82

Bake Element

$2.70

Screw

This screw is sold individually.

$41.89

Interior Oven Door Glass

This is the innermost piece of glass that faces in your oven when the door is close.

$5.25

Touch-Up Paint - White

$37.04

Thermal Overload Safety Thermostat

This part establishes and maintains the internal temperature of the oven cavity.

$23.36

Light Bulb - 120-130V - 15W

Sold individually.

$18.07

2 Piece Broiler Pan

$40.91

Broil Element

This broil element is found on the roof of the oven.

$2.70

SCREW

$4.46

SCREW

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Inner window glass cracked

  • Customer: Evan from Albuquerque NM
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 62 of 78 people found this instruction helpful
The first thing I did was to remove the oven door by releasing the two latches on the hinges (by hand). I then raised the door toward the vertical position and lifted up. The hinges slide out of the oven housing. I laid the door, inside face up on my island counter top. This ensures that none of the parts will fall when disassembling the door. Next I un... read more

No heat after cleaning oven

  • Customer: Frederick from St. Louis MO
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 45 of 51 people found this instruction helpful
This built-in oven was slid out of it's space and set on a box. I removed the back cover with nut driver and located the safety overload device. removed nuts and used pliers to remove wires and replace them. The power must be off to do this repair.Replaced the cover and slid back into place. This could be a lot more difficult if your power cord or gas line ... read more

The circuit board shorted out

  • Customer: Bruce from Manassas VA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 59 of 102 people found this instruction helpful
The biggest challenge was figuring out how the panel was removed. Once I got that done, it was a piece of cake, just make sure that the connectors go back on the same slots on the new circuit board. read more