Quick Question!

Have you ever purchased from PartSelect.com before?

Models > RBD245PRT03

RBD245PRT03 Whirlpool Wall Oven - Overview

Get Parts and Repair Help for RBD245PRT03

If you know the wall oven repair part you need, you can browse the list of all parts on the RBD245PRT03, or you can search by name or part description. You can also find your part by where it is located on the RBD245PRT03 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your wall oven. We’ve also included any installation videos we have for RBD245PRT03 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$7.22

Touch-Up Paint - White

18ml

Order within the next 11 hrs and your part ships today!
$11.07

Spray Paint - 12 oz. - White

Order within the next 11 hrs and your part ships today!
$6.80

Touch-up Paint - Black

16ml

Order within the next 11 hrs and your part ships today!
$4.94

SCREW

Sold individually.

Order within the next 11 hrs and your part ships today!
$17.72

RETAINER

Order within the next 11 hrs and your part ships today!
$64.94

Door Handle - Black

Screws NOT included.

Order within the next 11 hrs and your part ships today!
$20.80

Spray Paint - Surperior Black

This is a 12oz can of black spray paint.

Order within the next 11 hrs and your part ships today!
$38.23

VENT-OVEN

Order within the next 11 hrs and your part ships today!
$27.34

Bracket, Handle

Order within the next 11 hrs and your part ships today!
$46.84

Door Handle - White

Screws NOT included.

Order within the next 11 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

No heat after cleaning oven

  • Customer: Frederick from St. Louis, MO
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 82 of 90 people found this instruction helpful
This built-in oven was slid out of it's space and set on a box. I removed the back cover with nut driver and located the safety overload device. removed nuts and used pliers to remove wires and replace them. The power must be off to do this repair.Replaced the cover and slid back into place. This could be a lot more difficult if your power cord or gas line ... read more

I broke the Bake Element while cleaning the oven.

  • Customer: Daniel from Cheraw, SC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 37 of 45 people found this instruction helpful
I removed the two screws that held the bake element in place. Next I removed the Bake Element. I had to unscrew the oven to go behind it because when one piece off of the element broke, it slide back behind the oven. I pushed the wire back thru the piece holes, connected the Element, and pushed the element with the wires back through the holes. I rescrewed t... read more

Broken inner door glass

  • Customer: Elizabeth from Seattle, WA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 24 of 28 people found this instruction helpful
I removed all the screws attaching the inner liner to the door, then removed the broken glass. I did this before ordering the replacement glass so I could be sure that only one piece was broken -- the door contains four pieces of glass in all. After the replacement glass arrived (really fast delivery!), I cleaned all the parts and reassembled the door. I ... read more