Models > RB787GS2BB

RB787GS2BB Hotpoint Range - Overview

Get Parts and Repair Help for RB787GS2BB

If you know the range repair part you need, you can browse the list of all parts on the RB787GS2BB, or you can search by name or part description. You can also find your part by where it is located on the RB787GS2BB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for RB787GS2BB parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the RB787GS2BB [Viewing 4 of 4]

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$25.99

Bake Element

This partially open-style bake element comes with push-on terminals and is located on the bottom of the oven.

$4.27

Single Heating Element Support Clip

This metallic clip is used to help support the broil element. Sold individually.

$11.54

Timer Knobs - Kit of 3

$29.82

Hinge with Roller - Right Side

$34.18

Hinge with Roller - Left Side

$16.87

Broiler Pan - Large

Includes the pan and grate.

$45.29

Broil Element - 240V

This element has push-on terminals.

$2.36

SCREW

Sold Individually.

$2.36

Single Screw Only

Sold Individually.

$2.79

Screw

Sold Individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven took 30 minutes to get to 380 degrees-no hotter

  • Customer: Sandra from Hayward CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 367 of 369 people found this instruction helpful
First I searched this site and read about the repairs - which made me feel like my husband could do it with ease. Then he removed two screws inside the oven, removed the broken element (didn't know it was broken til removed) and replaced the new one - just like that! The real key was being able to read how it was for other people who had already done it. ... read more

Bake element burned out

  • Customer: Laura from N. Little Rock AR
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 185 of 251 people found this instruction helpful
I turned off the power to the oven at the breaker. Then I removed the two screws from the old element, pulled the old element out about 3 inches and disconnected the wires from the element and installed the new one. read more

Daughter dropped dish on element......broke it!

  • Customer: Danny from Trinity NC
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 71 of 72 people found this instruction helpful
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires
the repeated the process to complete the installation.
Relly easy. read more