Models > RB787BC5BB

RB787BC5BB Hotpoint Range - Overview

Get Parts and Repair Help for RB787BC5BB

If you know the range repair part you need, you can browse the list of all parts on the RB787BC5BB, or you can search by name or part description. You can also find your part by where it is located on the RB787BC5BB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for RB787BC5BB parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the RB787BC5BB [Viewing 3 of 3]

$2.52

Light Bulb - 40W

Sold individually.

$59.08

Bake Element - Push On Terminals - 240V

The bake element is found on the bottom of the oven and has male spade terminals.

$41.27

Oven Rack

Sold individually.

$2.23

Drawer Support

$22.36

Surface Burner Switch - 6" - 1560W

This switch controls the small burner on a range/stove top.

$48.91

Broil Element - 240V

This broil element is found on the roof of the oven.

$1.34

Lens

$83.91

Large Haliant Burner with Limiter - 8"

$5.77

Foot - Leveller

$5.55

Oven Light Socket - With Push In Receptacle

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Lower bake Element would not heat.

  • Customer: Ronald from Nassau NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Pliers
  • 80 of 82 people found this instruction helpful
First I slid the stove out and unpluged it, then removed two screws,slid out element, disconected two wires, slid new element in to place, pluged two wires in ,put into place and installed two screws, pluged stove back in, and turned on to try. Works perfect. read more

Broken heating element

  • Customer: Paul from anna TX
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 37 of 39 people found this instruction helpful
1)Turn off power to stove
2)remove 2 bolts holding heating element
3)pull element out of the back of the oven about 8" so that the wire connects is visable
4)pull wire clips off of heating element and remove element from the oven
5)put wire clips on the new heating element
6)push new heating element back into the holes in the back of... read more

Large burner would not get hot

  • Customer: Kevin from Leominster MA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 24 of 33 people found this instruction helpful
Repair was very simple. Removed 2 screws under the cooktop, tilt the cooktop back, unplug 4 wires from 8" burner, remove two screws holding retaining clips, install new burner in reverse order. Very simple! read more