Models > RB757GN5WH

RB757GN5WH Hotpoint Range - Overview

Get Parts and Repair Help for RB757GN5WH

If you know the range repair part you need, you can browse the list of all parts on the RB757GN5WH, or you can search by name or part description. You can also find your part by where it is located on the RB757GN5WH by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for RB757GN5WH parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the RB757GN5WH [Viewing 5 of 5]

$22.37

Bake Element

This partially open-style bake element comes with push-on terminals and is located on the bottom of the oven.

$30.05

Surface Element - 8" - 2350W

$21.91

Surface Element - 6" - 240V

This Y-frame six inch surface burner element has five turns and a metallic center medallion.

$4.27

Single Heating Element Support Clip

This metallic clip is used to help support the broil element. Sold individually.

$11.54

Timer Knobs - Kit of 3

$29.82

Hinge with Roller - Right Side

$5.74

Porcelain Drip Bowl - 6"

$7.23

Porcelain Drip Bowl - 8"

This 8" drip bowl is intended for use with loop style surface mount burner element units.

$2.36

Single Screw Only

Sold Individually.

$34.18

Hinge with Roller - Left Side

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Bake element cracked on its own

  • Customer: Timothy from Cordova TN
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 466 of 469 people found this instruction helpful
Flipped the breaker. Removed shelf, Find the right size nut socket, unscrew the two screws, pull the element out a little bit, disconnect the wires (on pretty tight), pull out element, clean out any mess in the oven, compare element with new one to make sure its the same size and such, connect wires to new element, replace screws, flip breaker back, tur... read more

Oven took 30 minutes to get to 380 degrees-no hotter

  • Customer: Sandra from Hayward CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 371 of 373 people found this instruction helpful
First I searched this site and read about the repairs - which made me feel like my husband could do it with ease. Then he removed two screws inside the oven, removed the broken element (didn't know it was broken til removed) and replaced the new one - just like that! The real key was being able to read how it was for other people who had already done it. ... read more

Bake element burned out

  • Customer: Laura from N. Little Rock AR
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 187 of 253 people found this instruction helpful
I turned off the power to the oven at the breaker. Then I removed the two screws from the old element, pulled the old element out about 3 inches and disconnected the wires from the element and installed the new one. read more