Quick Question!

Have you ever purchased from PartSelect.com before?

Models > RB757BH1WH

RB757BH1WH Hotpoint Range - Overview

Get Parts and Repair Help for RB757BH1WH

If you know the range repair part you need, you can browse the list of all parts on the RB757BH1WH, or you can search by name or part description. You can also find your part by where it is located on the RB757BH1WH by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for RB757BH1WH parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the RB757BH1WH

[Viewing 3 of 3]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.88

Light Bulb - 40W

This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these repla...

$7.42

Drip Bowl - 6"

This drip bowl, also known as the drip pan and burner bowl, is 6 inches in diameter and is used to catch spills from cooking on the top burner. If your bowls are getting stained, dirty, or rusted, then this replacement can solve it. First, remove the element from the top stove, then pull out the old drip pan. Set the new bowl and make sure it is aligned to where the element is plugged into. Lastly, you can put the element back in. For safety precautions, make sure to unplug the range from the power source and wait until the surface is cool before replacing this part.

$9.43

Drip Bowl - 8"

This drip bowl is sold individually. It is chrome in color and measures 10 inches in diameter at the widest point, with a hole in the middle. This is used to catch drippings and fo...

$68.62

Bake Element - Push On Terminals - 240V

The bake element is located on the bottom of the oven. If your oven will not heat properly it may be due to a faulty or damaged baking element. If you can see that the element has been separated or blistered, you should replace the part immediately. If there is no visible damage, turn the oven on and check to see if the element heats evenly. If the element is not heating evenly, or if it is not heating at all, it will need to be replaced. This element is 19 inches wide x 19 inches long, and has male spade push on terminals.

$13.33

Surface Burner Terminal Block Kit

This kit includes the female contact with wires, terminal block and mounting clip.

$22.98

Surface Burner Switch - 8" - 2500W

$14.40

Surface Burner Terminal Block Kit

Also known as receptacle.

$43.91

Oven Rack

The oven rack is sold individually. It is chrome in color and measures approximately 24 inches wide by 17-1/2 inches deep. The rack is used to hold cookware in the oven and slides back and forth for easy access. Racks can become rough and discolored over time and may need to be replaced, or perhaps you just need extra storage space in the oven! This repair is extremely simple and does not require any tools. Before you begin, ensure that the rack edges are straight and have not warped from shipment. Once the oven door is open, the stop end goes in first and it simply slides into place.

$46.81

Surface Burner Element - 8"

This Y-frame eight inch surface burner element has five turns and a metallic center medallion.

$26.32

Surface Burner Switch - 6" - 1560W

This switch controls the small burner on a range/stove top.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Burner bowls needed replacement

  • Customer: Tom from North Prairie, WI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 475 of 481 people found this instruction helpful
Very easy repair, Pulled burner coil out, removed old burner bowl. Put in new burner bowl, plugged burner coil back in... easy as 1,2,3 read more

Burner Bowl Needed Replaced

  • Customer: Stephen from Knoxville, TN
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 518 of 676 people found this instruction helpful
Removed burner element and put in bowl read more

Burner bowls were rusty and unsalvageable. Surface element wasn't heating.

  • Customer: Marguerite from Palm Harbour, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 220 of 284 people found this instruction helpful
Removed all surface elements, threw away old burner bowls, put the 3 older surface elements back in place and inserted the new element.

The burner bowls look great. Now I won't wait so long to replace.

Thanks. read more