Quick Question!

Have you ever purchased from PartSelect.com before?

Models > RB525GV1

RB525GV1 Hotpoint Range - Overview

Get Parts and Repair Help for RB525GV1

If you know the range repair part you need, you can browse the list of all parts on the RB525GV1, or you can search by name or part description. You can also find your part by where it is located on the RB525GV1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for RB525GV1 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the RB525GV1

[Viewing 3 of 3]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$29.86

Bake Element - 240V 2300W

This bake element is meant for your range and is 240 volts and 2300 watts. This closed hinged style element with screw-in terminals measures at 15-1/4 inches long and 18-1/4 inches...

$14.40

Surface Burner Terminal Block Kit

Also known as receptacle.

$5.25

Drip Bowl - 6"

This 6 inch chrome drip bowl is intended for use with solid terminal plug-in style surface burner units on electric ranges.

$36.66

Surface Element - 8" - 2350W

The surface element, also known as the coil surface element, transfers heat to the area on top of range. The element is 8 inches in diameter. If your surface element does not heat, over heats, or heats inconsistently, replacing this part can be the solution to your issue. To determine whether the element is defective, use a multimeter to test it. Before installing the new element, make sure the drip bowl is properly aligned with the notch of the pan. Insert the new element into the reciprocal at a 40 degree angle. Refer to the instructions provided by the manufacturer for more guidance.

$33.73

Broil Element

The broil element is located at the top of the oven and gives off heat in order to bake evenly. If you notice that the element is not heating up or is not cooking evenly it could b...

$27.16

Surface Element - 6" - 240V

If you notice that your surface element will not heat properly, you may need to replace it. This surface element is 6 inches in diameter and 240V. It is a Y-frame surface burner element with five turns and a metallic center medallion. When completing this repair, if you notice any signs of corrosion or overheating on the terminal, you may want to consider replacing the terminal block as well as the surface element. Many of our customers have rated this repair as easy. To complete this repair, simply tilt the old element up and remove it, and then replace it with your new one.

$4.97

Drip Bowl - 8"

This 8 inch chrome drip bowl is intended for use with solid terminal plug-in style surface burner units on electric ranges.

$27.16

Infinite Switch Kit

The infinite switch controls the stove top surface burner. This switch will work with most of the electrical range models with coil burner elements.

$2.06

Screw

This screw is sold individually.

$18.56

Broiler Pan - Large

This large broiler pan is found in the bottom of your oven and is used to catch drippings from broiling foods. This part includes the grate and bottom pan and is made of porcelain. The grate measures 15-1/2 inches wide by 13 inches deep and the pan is about 17 inches wide by 13 inches deep. No tools are required to replace this item, simply pull out the lower drawer of your range, pull down the front of the drawer, slide the pan out and slide the new one into place. This is a genuine part sourced right from the manufacturer.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

element quit working

  • Customer: Wilbur from Taylorville, IL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 502 of 521 people found this instruction helpful
Unhooked electrical wiring from unit and rehooked new unit to electrical wiring. read more

Bottom heating element went out

  • Customer: Michael from Saint Paris, OH
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Wrench (Adjustable)
  • 432 of 441 people found this instruction helpful
This repair took between 15 and 30 minutes BUT ONLY because my 10 year old son did the repair. He couldn't wait for his father to come home from work. His only complaint was the tight fit to reach the back of the oven (he wanted to take the oven door off but I said no). He removed the 2 screws that held the element in place and then pulled it from the ove... read more

Oven heating element was broken.

  • Customer: Phyllis from Fisk, MO
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Socket set
  • 300 of 373 people found this instruction helpful
The heating element in the lower oven of my 18 year-old GE double oven broke into two pieces and would not heat. Because of the age of the oven, a replacement part was unavailable through GE. I came across PartSelect.com through an Internet search and ordered the part online. Total cost was $33.50, counting s/h. FedEx delivered the new element less than 4... read more