Models > RB19EY-3A2

RB19EY-3A2 (5C75A) Magic Chef Refrigerator - Overview

Get Parts and Repair Help for RB19EY-3A2

If you know the refrigerator repair part you need, you can browse the list of all parts on the RB19EY-3A2, or you can search by name or part description. You can also find your part by where it is located on the RB19EY-3A2 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for RB19EY-3A2 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?


This screw is sold individually.


Light Rocker Switch

This light switch is triggered by the door opening and closing.



Sold individually.


Defrost Thermostat - With Wire and Clip

This refrigerator defrost thermostat will cut out at 80 degrees Fahrenheit and kick back when the temperature drops to 15 degrees Fahrenheit.


Door Shelf Trim Retainer

Sold individually.


Ice Cube Tray

This tray makes 48 mini ice cubes.



Use of this rivet requires a rivet tool.


Butter Dish


Kickplate Clip

Sold Individually. 2 are required to hold kickplate in place.



Sold individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

cocktails running out of ice

  • Customer: Craig from Westminster CA
  • Difficulty: Very Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Nutdriver, Pliers, Screw drivers, Socket set, Wrench set, Wrench(Adjustable)
  • 51 of 56 people found this instruction helpful
filled both ice cube trays up with water and placed in the freezer.. within hours my ice oproduction was doubled! no more warm cocktails : ) read more

Lights inside refrigerator not working

  • Customer: Clint from Rayville MO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 48 of 58 people found this instruction helpful
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again. read more

Thermostat ceased to function. Fridge very cold.

  • Customer: Paul from Millboro VA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers, Wrench set
  • 27 of 36 people found this instruction helpful
I removed control knobs and a couple of screws and forced the assembly down enough to remove the old thermostat, and insert the new one. Lucky me it was a identical replacement item. Job took about an hour. read more